Trigger the reset line of the mmc controller while probing, if available. The reset should be optional for now, at least until all related DT nodes have the reset property.
Reviewed-by: Kevin Hilman <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> --- drivers/mmc/host/meson-gx-mmc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 4f972b879fe6..9bca359f7936 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -35,6 +35,7 @@ #include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/regulator/consumer.h> +#include <linux/reset.h> #include <linux/interrupt.h> #include <linux/bitfield.h> #include <linux/pinctrl/consumer.h> @@ -1184,6 +1185,14 @@ static int meson_mmc_probe(struct platform_device *pdev) goto free_host; } + ret = device_reset_optional(&pdev->dev); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "device reset failed: %d\n", ret); + + return ret; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(host->regs)) { -- 2.14.3
