Anson Huang
Best Regards!


> -----Original Message-----
> From: Shawn Guo [mailto:[email protected]]
> Sent: Sunday, May 20, 2018 8:51 PM
> To: Anson Huang <[email protected]>
> Cc: [email protected]; Fabio Estevam <[email protected]>;
> [email protected]; [email protected]; dl-linux-imx
> <[email protected]>; [email protected];
> [email protected]; [email protected]
> Subject: Re: [PATCH] ARM: dts: imx7d: use operating-points-v2 for cpu
> 
> On Wed, May 16, 2018 at 12:48:17PM +0800, Anson Huang wrote:
> > This patch uses "operating-points-v2" instead of "operating-points" to
> > be more fit with cpufreq-dt driver.
> >
> > Signed-off-by: Anson Huang <[email protected]>
> > ---
> >  arch/arm/boot/dts/imx7d.dtsi | 24 +++++++++++++++++++-----
> >  1 file changed, 19 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/imx7d.dtsi
> > b/arch/arm/boot/dts/imx7d.dtsi index 4c9877e..28980c8 100644
> > --- a/arch/arm/boot/dts/imx7d.dtsi
> > +++ b/arch/arm/boot/dts/imx7d.dtsi
> > @@ -9,12 +9,8 @@
> >  / {
> >     cpus {
> >             cpu0: cpu@0 {
> > -                   operating-points = <
> > -                           /* KHz  uV */
> > -                           996000  1075000
> > -                           792000  975000
> > -                   >;
> >                     clock-frequency = <996000000>;
> > +                   operating-points-v2 = <&cpu0_opp_table>;
> >             };
> >
> >             cpu1: cpu@1 {
> > @@ -22,6 +18,24 @@
> >                     device_type = "cpu";
> >                     reg = <1>;
> >                     clock-frequency = <996000000>;
> > +                   operating-points-v2 = <&cpu0_opp_table>;
> > +           };
> > +   };
> > +
> > +   cpu0_opp_table: opp_table0 {
> 
> Hyphen is recommended in node name.  Also the suffix 0 doesn't mean too
> much here.  That said, a better node name would be 'opp-table'.
> 
> > +           compatible = "operating-points-v2";
> > +           opp-shared;
> > +
> > +           opp-792000000 {
> > +                   opp-hz = /bits/ 64 <792000000>;
> > +                   opp-microvolt = <975000>;
> > +                   clock-latency-ns = <150000>;
> > +           };
> 
> We recommend to have a newline between nodes.
> 
> I fixed them all and applied the patch.
> 
> Shawn
 
Thanks Shawn.

Anson.



> 
> > +           opp-996000000 {
> > +                   opp-hz = /bits/ 64 <996000000>;
> > +                   opp-microvolt = <1075000>;
> > +                   clock-latency-ns = <150000>;
> > +                   opp-suspend;
> >             };
> >     };
> >
> > --
> > 2.7.4
> >

Reply via email to