On Mon, May 21, 2018 at 12:59:05PM -0700, Jae Hyun Yoo wrote:
> This commit adds dt-bindings documents for PECI hwmon client drivers.
>
> Signed-off-by: Jae Hyun Yoo <[email protected]>
> Reviewed-by: Haiyue Wang <[email protected]>
> Reviewed-by: James Feist <[email protected]>
> Reviewed-by: Vernon Mauery <[email protected]>
> Cc: Andrew Jeffery <[email protected]>
> Cc: Arnd Bergmann <[email protected]>
> Cc: Jason M Biils <[email protected]>
> Cc: Joel Stanley <[email protected]>
> ---
> .../bindings/hwmon/peci-cputemp.txt | 23 ++++++++++++++++++
> .../bindings/hwmon/peci-dimmtemp.txt | 24 +++++++++++++++++++
> 2 files changed, 47 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/peci-cputemp.txt
> create mode 100644 Documentation/devicetree/bindings/hwmon/peci-dimmtemp.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/peci-cputemp.txt
> b/Documentation/devicetree/bindings/hwmon/peci-cputemp.txt
> new file mode 100644
> index 000000000000..2f59aee12d9e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/peci-cputemp.txt
> @@ -0,0 +1,23 @@
> +Bindings for Intel PECI (Platform Environment Control Interface) cputemp
> driver.
> +
> +Required properties:
> +- compatible : Should be "intel,peci-cputemp".
> +- reg : Should contain address of a client CPU. Address range of CPU
> + clients is starting from 0x30 based on PECI specification.
> +
> +Example:
> + peci-bus@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + < more properties >
> +
> + peci-cputemp@30 {
> + compatible = "intel,peci-cputemp";
> + reg = <0x30>;
> + };
[...]
> + peci-dimmtemp@30 {
> + compatible = "intel,peci-dimmtemp";
> + reg = <0x30>;
> + };
As I said in the prior version, 2 nodes at the same address is wrong.
Rob
