On Thu, May 17, 2018 at 03:06:26PM +0200, Andrea Greco wrote:
> From: Andrea Greco <a.gr...@4sigma.it>
>
> Add devicetree bindings for smsc com20020
>
> Signed-off-by: Andrea Greco <a.gr...@4sigma.it>
> ---
> .../devicetree/bindings/net/smsc-com20020.txt | 21
> +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/smsc-com20020.txt
One typo, otherwise:
Reviewed-by: Rob Herring <r...@kernel.org>
>
> diff --git a/Documentation/devicetree/bindings/net/smsc-com20020.txt
> b/Documentation/devicetree/bindings/net/smsc-com20020.txt
> new file mode 100644
> index 000000000000..92360b054873
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/smsc-com20020.txt
> @@ -0,0 +1,21 @@
> +SMSC com20020 Arcnet network controller
> +
> +Required propelty:
property
> +- timeout-ns: Arcnet bus timeout, Idle Time (328000 - 20500)
> +- bus-speed-bps: Arcnet bus speed (10000000 - 156250)
> +- smsc,xtal-mhz: External oscillator frequency
> +- smsc,backplane-enabled: Controller use backplane mode
> +- reset-gpios: Chip reset pin
> +- interrupts: Should contain controller interrupt
> +
> +arcnet@28000000 {
> + compatible = "smsc,com20020";
> +
> + timeout-ns = <20500>;
> + bus-speed-bps = <10000000>;
> + smsc,xtal-mhz = <20>;
> + smsc,backplane-enabled;
> +
> + reset-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
> + interrupts = <&gpio2 10 GPIO_ACTIVE_LOW>;
> +};
> --
> 2.14.3
>
