> -----Original Message-----
> From: Sudeep Holla <sudeep.ho...@arm.com>
> Sent: Thursday, May 24, 2018 15:52
> To: Ilia Lin <ilia...@codeaurora.org>; vire...@kernel.org; n...@ti.com;
> sb...@kernel.org; r...@kernel.org; mark.rutl...@arm.com;
> r...@rjwysocki.net
> Cc: Sudeep Holla <sudeep.ho...@arm.com>; linux...@vger.kernel.org;
> devicet...@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v12 1/2] cpufreq: Add Kryo CPU scaling driver
>
> Hi Ilia,
>
>
> On 24/05/18 09:57, Ilia Lin wrote:
> > In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO
> > processors, the CPU frequency subset and voltage value of each OPP
> > varies based on the silicon variant in use. Qualcomm Process Voltage
> > Scaling Tables defines the voltage and frequency value based on the
> > msm-id in SMEM and speedbin blown in the efuse combination.
> > The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the
> > SoC to provide the OPP framework with required information.
> > This is used to determine the voltage and frequency value for each OPP
> > of
> > operating-points-v2 table when it is parsed by the OPP framework.
> >
> > Signed-off-by: Ilia Lin <ilia...@codeaurora.org>
> > ---
> > drivers/cpufreq/Kconfig.arm | 10 ++
> > drivers/cpufreq/Makefile | 1 +
> > drivers/cpufreq/cpufreq-dt-platdev.c | 3 +
> > drivers/cpufreq/qcom-cpufreq-kryo.c | 194
> > +++++++++++++++++++++++++++++++++++
> > 4 files changed, 208 insertions(+)
> > create mode 100644 drivers/cpufreq/qcom-cpufreq-kryo.c
> >
> > diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> > index de55c7d..0bfd40e 100644
> > --- a/drivers/cpufreq/Kconfig.arm
> > +++ b/drivers/cpufreq/Kconfig.arm
> > @@ -124,6 +124,16 @@ config ARM_OMAP2PLUS_CPUFREQ
> > depends on ARCH_OMAP2PLUS
> > default ARCH_OMAP2PLUS
> >
> > +config ARM_QCOM_CPUFREQ_KRYO
> > + bool "Qualcomm Kryo based CPUFreq"
> > + depends on QCOM_QFPROM
> > + depends on QCOM_SMEM
> > + select PM_OPP
> > + help
> > + This adds the CPUFreq driver for Qualcomm Kryo SoC based boards.
> > +
> > + If in doubt, say N.
> > +
> > config ARM_S3C_CPUFREQ
> > bool
> > help
> > diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index
> > 8d24ade..fb4a2ec 100644
> > --- a/drivers/cpufreq/Makefile
> > +++ b/drivers/cpufreq/Makefile
> > @@ -65,6 +65,7 @@ obj-$(CONFIG_MACH_MVEBU_V7) +=
> mvebu-cpufreq.o
> > obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
> > obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
> > obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
> > +obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO) += qcom-cpufreq-
> kryo.o
> > obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
> > obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
> > obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
> > diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c
> > b/drivers/cpufreq/cpufreq-dt-platdev.c
> > index 3b585e4..77d6ab8 100644
> > --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> > +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> > @@ -118,6 +118,9 @@
> >
> > { .compatible = "nvidia,tegra124", },
> >
> > + { .compatible = "qcom,apq8096", },
> > + { .compatible = "qcom,msm8996", },
> > +
> > { .compatible = "st,stih407", },
> > { .compatible = "st,stih410", },
> >
> > diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c
> > b/drivers/cpufreq/qcom-cpufreq-kryo.c
> > new file mode 100644
> > index 0000000..9fe379c
> > --- /dev/null
> > +++ b/drivers/cpufreq/qcom-cpufreq-kryo.c
> > @@ -0,0 +1,194 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> > + */
> > +
> > +/*
> > + * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO
> > +processors,
> > + * the CPU frequency subset and voltage value of each OPP varies
> > + * based on the silicon variant in use. Qualcomm Process Voltage
> > +Scaling Tables
> > + * defines the voltage and frequency value based on the msm-id in
> > +SMEM
> > + * and speedbin blown in the efuse combination.
> > + * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from
> > +the SoC
> > + * to provide the OPP framework with required information.
> > + * This is used to determine the voltage and frequency value for each
> > +OPP of
> > + * operating-points-v2 table when it is parsed by the OPP framework.
> > + */
> > +
> > +#include <linux/cpu.h>
> > +#include <linux/err.h>
> > +#include <linux/init.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/nvmem-consumer.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_opp.h>
> > +#include <linux/slab.h>
> > +#include <linux/soc/qcom/smem.h>
> > +
> > +#define MSM_ID_SMEM 137
> > +
> > +enum _msm_id {
> > + MSM8996V3 = 0xF6ul,
> > + APQ8096V3 = 0x123ul,
> > + MSM8996SG = 0x131ul,
> > + APQ8096SG = 0x138ul,
> > +};
> > +
> > +enum _msm8996_version {
> > + MSM8996_V3,
> > + MSM8996_SG,
> > + NUM_OF_MSM8996_VERSIONS,
> > +};
> > +
> > +static enum _msm8996_version __init
> > +qcom_cpufreq_kryo_get_msm_id(void)
> > +{
> > + size_t len;
> > + u32 *msm_id;
> > + enum _msm8996_version version;
> > +
> > + msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY,
> MSM_ID_SMEM, &len);
> > + /* The first 4 bytes are format, next to them is the actual msm-id */
> > + msm_id++;
> > +
> > + switch ((enum _msm_id)*msm_id) {
> > + case MSM8996V3:
> > + case APQ8096V3:
> > + version = MSM8996_V3;
> > + break;
> > + case MSM8996SG:
> > + case APQ8096SG:
> > + version = MSM8996_SG;
> > + break;
> > + default:
> > + version = NUM_OF_MSM8996_VERSIONS;
> > + }
> > +
> > + return version;
> > +}
> > +
> > +static int qcom_cpufreq_kryo_probe(struct platform_device *pdev) {
> > + struct opp_table *opp_tables[NR_CPUS] = {0};
> > + struct platform_device *cpufreq_dt_pdev;
> > + enum _msm8996_version msm8996_version;
> > + struct nvmem_cell *speedbin_nvmem;
> > + struct device_node *np;
> > + struct device *cpu_dev;
> > + unsigned cpu;
> > + u8 *speedbin;
> > + u32 versions;
> > + size_t len;
> > + int ret;
> > +
> > + cpu_dev = get_cpu_device(0);
> > + if (NULL == cpu_dev)
> > + return -ENODEV;
> > +
> > + msm8996_version = qcom_cpufreq_kryo_get_msm_id();
> > + if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
> > + dev_err(cpu_dev, "Not Snapdragon 820/821!");
> > + return -ENODEV;
> > + }
> > +
> > + np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
> > + if (IS_ERR(np))
> > + return PTR_ERR(np);
> > +
> > + if (!of_device_is_compatible(np, "operating-points-v2-kryo-cpu")) {
> > + of_node_put(np);
> > + return -ENOENT;
> > + }
> > +
> > + speedbin_nvmem = of_nvmem_cell_get(np, NULL);
> > + of_node_put(np);
> > + if (IS_ERR(speedbin_nvmem)) {
> > + dev_err(cpu_dev, "Could not get nvmem cell: %ld\n",
> > + PTR_ERR(speedbin_nvmem));
> > + return PTR_ERR(speedbin_nvmem);
> > + }
> > +
> > + speedbin = nvmem_cell_read(speedbin_nvmem, &len);
> > + nvmem_cell_put(speedbin_nvmem);
> > +
> > + switch (msm8996_version) {
> > + case MSM8996_V3:
> > + versions = 1 << (unsigned int)(*speedbin);
> > + break;
> > + case MSM8996_SG:
> > + versions = 1 << ((unsigned int)(*speedbin) + 4);
> > + break;
> > + default:
> > + BUG();
> > + break;
> > + }
> > +
> > + for_each_possible_cpu(cpu) {
> > + cpu_dev = get_cpu_device(cpu);
> > + if (NULL == cpu_dev) {
> > + ret = -ENODEV;
> > + goto free_opp;
> > + }
> > +
> > + opp_tables[cpu] =
> dev_pm_opp_set_supported_hw(cpu_dev,
> > + &versions, 1);
> > + if (IS_ERR(opp_tables[cpu])) {
> > + ret = PTR_ERR(opp_tables[cpu]);
> > + dev_err(cpu_dev, "Failed to set supported
> hardware\n");
> > + goto free_opp;
> > + }
> > + }
> > +
> > + cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -
> 1,
> > + NULL, 0);
> > + if (!IS_ERR(cpufreq_dt_pdev))
> > + return 0;
> > +
> > + ret = PTR_ERR(cpufreq_dt_pdev);
> > + dev_err(cpu_dev, "Failed to register platform device\n");
> > +
> > +free_opp:
> > + for_each_possible_cpu(cpu) {
> > + if (IS_ERR_OR_NULL(opp_tables[cpu]))
> > + break;
> > + dev_pm_opp_put_supported_hw(opp_tables[cpu]);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static struct platform_driver qcom_cpufreq_kryo_driver = {
> > + .probe = qcom_cpufreq_kryo_probe,
> > + .driver = {
> > + .name = "qcom-cpufreq-kryo",
> > + },
> > +};
> > +
> > +/*
> > + * Since the driver depends on smem and nvmem drivers, which may
> > + * return EPROBE_DEFER, all the real activity is done in the probe,
> > + * which may be defered as well. The init here is only registering
> > + * the driver and the platform device.
> > + */
> > +static int __init qcom_cpufreq_kryo_init(void) {
> > + int ret;
> > +
> > + ret = platform_driver_register(&qcom_cpufreq_kryo_driver);
> > + if (unlikely(ret < 0))
> > + return ret;
> > +
> > + ret = PTR_ERR_OR_ZERO(platform_device_register_simple(
> > + "qcom-cpufreq-kryo", -1, NULL, 0));
>
>
> You simply can't do this unconditionally here. This will blow up on platforms
> where this driver is not supposed to work. The probe will be called on non-
> QCOM or non-Kryo QCOM platforms and I reckon it will crash trying to
> execute something in qcom_smem_get.
What do you mean by 'unconditionally'?
The driver depends on the smem and nvmem drivers, which depend on ARCH_QCOM:
+ depends on QCOM_QFPROM
+ depends on QCOM_SMEM
And if SMEM read in the probe returns something other than Kryo, it will exit.
>
> --
> Regards,
> Sudeep
