4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Esben Haabendal <e...@deif.com>
[ Upstream commit 76327a35caabd1a932e83d6a42b967aa08584e5d ]
The datasheet specifies a 3uS pause after performing a software
reset. The default implementation of genphy_soft_reset() does not
provide this, so implement soft_reset with the needed pause.
Signed-off-by: Esben Haabendal <e...@deif.com>
Reviewed-by: Andrew Lunn <and...@lunn.ch>
Signed-off-by: David S. Miller <da...@davemloft.net>
Signed-off-by: Sasha Levin <alexander.le...@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/net/phy/dp83640.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1203,6 +1203,23 @@ static void dp83640_remove(struct phy_de
kfree(dp83640);
}
+static int dp83640_soft_reset(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_soft_reset(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* From DP83640 datasheet: "Software driver code must wait 3 us
+ * following a software reset before allowing further serial MII
+ * operations with the DP83640."
+ */
+ udelay(10); /* Taking udelay inaccuracy into account */
+
+ return 0;
+}
+
static int dp83640_config_init(struct phy_device *phydev)
{
struct dp83640_private *dp83640 = phydev->priv;
@@ -1496,6 +1513,7 @@ static struct phy_driver dp83640_driver
.flags = PHY_HAS_INTERRUPT,
.probe = dp83640_probe,
.remove = dp83640_remove,
+ .soft_reset = dp83640_soft_reset,
.config_init = dp83640_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
