On Fri, May 25, 2018 at 10:49:57AM +0530, Viresh Kumar wrote: > It should be "#cooling-cells" instead of "cooling-cells". Fix it. > > Signed-off-by: Viresh Kumar <viresh.ku...@linaro.org>
Applied to hwmon-next after updating the subject. Thanks, Guenter > --- > Documentation/devicetree/bindings/hwmon/gpio-fan.txt | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt > b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt > index 439a7430fc68..2becdcfdc840 100644 > --- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt > +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt > @@ -11,7 +11,7 @@ Bindings for fan connected to GPIO lines > must have the RPM values in ascending order. > - alarm-gpios: This pin going active indicates something is wrong with > the fan, and a udev event will be fired. > -- cooling-cells: If used as a cooling device, must be <2> > +- #cooling-cells: If used as a cooling device, must be <2> > Also see: Documentation/devicetree/bindings/thermal/thermal.txt > min and max states are derived from the speed-map of the fan. > > -- > 2.15.0.194.g9af6a3dea062 >
