Document devicetree bindings for ROHM BD71837 PMIC MFD.

Signed-off-by: Matti Vaittinen <matti.vaitti...@fi.rohmeurope.com>
---
 .../devicetree/bindings/mfd/rohm,bd71837-pmic.txt  | 52 ++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt 
b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
new file mode 100644
index 000000000000..bbc46d38b162
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
@@ -0,0 +1,52 @@
+* ROHM BD71837 Power Management Integrated Circuit bindings
+
+BD71837MWV is a programmable Power Management IC for powering single-core,
+dual-core, and quad-core SoC’s such as NXP-i.MX 8M. It is optimized for
+low BOM cost and compact solution footprint. It integrates 8 Buck
+egulators and 7 LDO’s to provide all the power rails required by the SoC and
+the commonly used peripherals.
+
+Required properties:
+ - compatible          : Should be "rohm,bd71837".
+ - reg                 : I2C slave address.
+ - interrupt-parent    : Phandle to the parent interrupt controller.
+ - interrupts          : The interrupt line the device is connected to.
+ - interrupt-controller        : Marks the device node as an interrupt 
controller.
+ - #interrupt-cells    : The number of cells to describe an IRQ, should be 1 
or 2.
+                           The first cell is the IRQ number.
+                           The second cell if present is the flags, encoded as 
trigger
+                           masks from ../interrupt-controller/interrupts.txt.
+ - regulators:         : List of child nodes that specify the regulators
+                         Please see ../regulator/rohm,bd71837-regulator.txt
+ - clock:              : Please see ../clock/rohm,bd71837-clock.txt
+
+Example:
+
+       pmic: bd71837@4b {
+               compatible = "rohm,bd71837";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x4b>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <29 GPIO_ACTIVE_LOW>;
+               interrupt-names = "irq";
+               #interrupt-cells = <1>;
+               interrupt-controller;
+
+               regulators {
+                       buck1: BUCK1 {
+                               regulator-name = "buck1";
+                               regulator-min-microvolt = <700000>;
+                               regulator-max-microvolt = <1300000>;
+                               regulator-boot-on;
+                               regulator-ramp-delay = <1250>;
+                       };
+                       ...
+               };
+               clk: bd71837-32k-out {
+                       compatible = "rohm,bd71837-clk";
+                       #clock-cells = <0>;
+                       clock-frequency = <32768>;
+                       clock-output-names = "bd71837-32k-out";
+               };
+       };
-- 
2.14.3

Reply via email to