Hi Vladimir,
On Thu, 31 May 2018 at 10:33, Vladimir Zapolskiy
<[email protected]> wrote:
>
> On 05/30/2018 03:03 PM, Clément Péron wrote:
> > From: Colin Didier <[email protected]>
> >
> > Add missing compatible and clock properties for EPIT node.
> >
> > Signed-off-by: Colin Didier <[email protected]>
> > Signed-off-by: Clément Peron <[email protected]>
> > Reviewed-by: Fabio Estevam <[email protected]>
> > ---
> > arch/arm/boot/dts/imx6qdl.dtsi | 10 ++++++++++
> > 1 file changed, 10 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> > index c003e62bf290..0feec516847a 100644
> > --- a/arch/arm/boot/dts/imx6qdl.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> > @@ -844,13 +844,23 @@
> > };
> >
> > epit1: epit@20d0000 { /* EPIT1 */
>
> epit1: timer@20d0000 { ...
>
> And /* EPIT1 */ comment can be removed, it is quite clear from the same
> line context.
>
> Formally it is a subject to another patch, but I think this can be
> accepted as a part of this one.
Should I also update other boards ?
I only did it for imx6qdl.dtsi, but the EPIT is present in other boards
but i can't test it myself.
>
> > + compatible = "fsl,imx6q-epit",
> > "fsl,imx31-epit";
> > reg = <0x020d0000 0x4000>;
> > interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clks IMX6QDL_CLK_IPG_PER>,
> > + <&clks IMX6QDL_CLK_EPIT1>;
> > + clock-names = "ipg", "per";
> > + status = "disabled";
> > };
> >
> > epit2: epit@20d4000 { /* EPIT2 */
>
> Same as above.
>
> > + compatible = "fsl,imx6q-epit",
> > "fsl,imx31-epit";
> > reg = <0x020d4000 0x4000>;
> > interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clks IMX6QDL_CLK_IPG_PER>,
> > + <&clks IMX6QDL_CLK_EPIT2>;
> > + clock-names = "ipg", "per";
> > + status = "disabled";
> > };
> >
> > src: src@20d8000 {
> >
>
> --
> With best wishes,
> Vladimir
