On Wed, May 23, 2018 at 5:06 PM, Pavel Machek <pa...@ucw.cz> wrote: > On Thu 2018-05-17 06:59:49, H. Nikolaus Schaller wrote: >> The register constants are so far defined in a way that they fit >> for the pcal9555a when shifted by the number of banks, i.e. are >> multiplied by 2 in the accessor function. >> >> Now, the pcal6524 has 3 banks which means the relative offset >> is multiplied by 4 for the standard registers. >> >> Simply applying the bit shift to the extended registers gives >> a wrong result, since the base offset is already included in >> the offset. >> >> Therefore, we have to add code to the 24 bit accessor functions >> that adjusts the register number for these exended registers. >> >> The formula finally used was developed and proposed by >> Andy Shevchenko <andy.shevche...@gmail.com>.
>> int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); >> + int addr = (reg & PCAL_GPIO_MASK) << bank_shift; >> + int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1; > Is this reasonable to do on each register access? Compiler will not be > able to optimize out fls and shifts, right? On modern CPUs fls() is one assembly command. OTOH, any proposal to do this better? What I can see is that bank_shift is invariant to the function, and maybe cached. -- With Best Regards, Andy Shevchenko