Make each SoC dtsi use its soc specific PMc compatible string. This solves
a potential issue on at91sam9261 and at91sam9263 when using suspend to RAM
Signed-off-by: Alexandre Belloni <alexandre.bell...@bootlin.com>
---
arch/arm/boot/dts/at91sam9261.dtsi | 2 +-
arch/arm/boot/dts/at91sam9263.dtsi | 2 +-
arch/arm/boot/dts/at91sam9rl.dtsi | 2 +-
arch/arm/boot/dts/sama5d4.dtsi | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi
b/arch/arm/boot/dts/at91sam9261.dtsi
index 53c63d0a418a..33f09d5ea020 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -590,7 +590,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc", "syscon";
+ compatible = "atmel,at91sam9261-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi
b/arch/arm/boot/dts/at91sam9263.dtsi
index 87fb0660ab5d..af68a86c9973 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -93,7 +93,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc", "syscon";
+ compatible = "atmel,at91sam9263-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi
b/arch/arm/boot/dts/at91sam9rl.dtsi
index bd001cca25a4..8fb22030f00b 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -832,7 +832,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9g45-pmc", "syscon";
+ compatible = "atmel,at91sam9rl-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 0cf9beddd556..92a35a1942b6 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -392,7 +392,7 @@
};
pmc: pmc@f0018000 {
- compatible = "atmel,sama5d3-pmc", "syscon";
+ compatible = "atmel,sama5d4-pmc", "syscon";
reg = <0xf0018000 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
--
2.17.1
