[PATCH 1/5] ARM: dts: cygnus: Fix I2C controller interrupt type

[Ray Jui]

Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
Cygnus SoC

Fixes: b51c05a331ff ("ARM: dts: add I2C device nodes for Broadcom Cygnus")
Fixes: 0f0b21a83ad2 ("ARM: dts: Move all Cygnus peripherals into axi bus")
Fixes: 9c5101f7a253 ("ARM: dts: Reorder Cygnus peripherals")

Signed-off-by: Ray Jui <ray....@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi 
b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 9fe4f5a..835a6f7 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -216,7 +216,7 @@
                        reg = <0x18008000 0x100>;
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+                       interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <100000>;
                        status = "disabled";
                };
@@ -245,7 +245,7 @@
                        reg = <0x1800b000 0x100>;
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+                       interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <100000>;
                        status = "disabled";
                };
-- 
2.1.4