On Thu, Jun 07, 2018 at 07:17:48PM +0530, Jagan Teki wrote:
> From: Michael Trimarchi <[email protected]>
>
> Add USB host and device support for BTicino i.MX6DL Mamoj board.
>
> Signed-off-by: Simone CIANNI <[email protected]>
> Signed-off-by: Raffaele RECALCATI <[email protected]>
> Signed-off-by: Michael Trimarchi <[email protected]>
> Signed-off-by: Jagan Teki <[email protected]>
> Reviewed-by: Fabio Estevam <[email protected]>
> ---
> Changes for v2:
> - collect Fabio r-w-b tag
>
> arch/arm/boot/dts/imx6dl-mamoj.dts | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts
> b/arch/arm/boot/dts/imx6dl-mamoj.dts
> index 5034b086035f..a727e1471006 100644
> --- a/arch/arm/boot/dts/imx6dl-mamoj.dts
> +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
> @@ -134,6 +134,17 @@
> vin-supply = <®_lcd_vgl>;
> };
>
> + reg_usb_host: regulator-usb-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usbhost-vbus";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbhost>;
> + regulator-min-microvolt = <50000000>;
> + regulator-max-microvolt = <50000000>;
> + gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> reg_wl18xx_vmmc: regulator-wl18xx-vmcc {
> compatible = "regulator-fixed";
> regulator-name = "vwl1807";
> @@ -297,6 +308,16 @@
> status = "okay";
> };
>
> +&usbh1 {
> + vbus-supply = <®_usb_host>;
> + status = "okay";
> +};
> +
> +&usbotg {
> + dr_mode = "peripheral";
> + status = "okay";
> +};
> +
> &usdhc1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usdhc1>;
> @@ -428,6 +449,12 @@
> >;
> };
>
> + pinctrl_usbhost: usbhost {
usbhostgrp.
Shawn
> + fsl,pins = <
> + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
> + >;
> + };
> +
> pinctrl_usdhc1: usdhc1grp {
> fsl,pins = <
> MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069
> --
> 2.14.3
>
