On 05:37-20180621, Tony Lindgren wrote:
> * Nishanth Menon <n...@ti.com> [180619 19:46]:
> > + cbass_main: cbass@100000 {
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */
> > + <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */
> > + <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */
> > + <0x01000000 0x00 0x01000000 0x0af02400>, /* Most
> > peripherals */
> > + <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS
> > */
> > + /* MCUSS Range */
> > + <0x28380000 0x00 0x28380000 0x03880000>,
> > + <0x40200000 0x00 0x40200000 0x00900100>,
> > + <0x42040000 0x00 0x42040000 0x03ac2400>,
> > + <0x45100000 0x00 0x45100000 0x00c24000>,
> > + <0x46000000 0x00 0x46000000 0x00200000>,
> > + <0x47000000 0x00 0x47000000 0x00068400>;
> > +
> > + cbass_mcu: cbass@28380000 {
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x28380000 0x28380000 0x03880000>, /* MCU
> > NAVSS*/
> > + <0x40200000 0x40200000 0x00900100>, /* First
> > peripheral window */
> > + <0x42040000 0x42040000 0x03ac2400>, /* WKUP */
> > + <0x45100000 0x45100000 0x00c24000>, /* MMRs,
> > remaining NAVSS */
> > + <0x46000000 0x46000000 0x00200000>, /* CPSW */
> > + <0x47000000 0x47000000 0x00068400>; /* OSPI
> > space 1 */
> > +
> > + cbass_wakeup: cbass@42040000 {
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + /* WKUP Basic peripherals */
> > + ranges = <0x42040000 0x42040000 0x03ac2400>;
> > + };
> > + };
> > + };
> > +};
>
> You should use cbass_main: interconnect@1000000 and so on here.
> Other than that looks good to me, thanks for updating it.
Thanks, will wait till Monday to see if there are any further comments,
else will post a V2.
--
Regards,
Nishanth Menon
