Hi Marc
On Tue, 2018-06-26 at 08:53 +0100, Marc Zyngier wrote:
> On Tue, 26 Jun 2018 03:04:06 +0100,
> Mars Cheng <[email protected]> wrote:
> >
> > This adds basic chip support for MT6765 SoC.
> >
> > Signed-off-by: Mars Cheng <[email protected]>
> > ---
> > arch/arm64/boot/dts/mediatek/Makefile | 1 +
> > arch/arm64/boot/dts/mediatek/mt6765-evb.dts | 33 ++++++
> > arch/arm64/boot/dts/mediatek/mt6765.dtsi | 158
> > +++++++++++++++++++++++++++
> > 3 files changed, 192 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt6765-evb.dts
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt6765.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt6765.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt6765.dtsi
> > new file mode 100644
> > index 0000000..ab34c0f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt6765.dtsi
>
> [...]
>
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 13
> > + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 14
> > + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 11
> > + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 10
> > + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>
> GICv3 doesn't encode the PPI affinity in its interrupt specifiers (or
> at least not this way). Please drop it.
Got it, will fix it.
>
> > + };
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + compatible = "simple-bus";
> > + ranges;
> > +
> > + sysirq: intpol-controller@10200a80 {
> > + compatible = "mediatek,mt6765-sysirq",
> > + "mediatek,mt6577-sysirq";
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > + interrupt-parent = <&gic>;
> > + reg = <0 0x10200a80 0 0x50>;
> > + };
> > +
> > + gic: interrupt-controller@0c000000 {
> > + compatible = "arm,gic-v3";
> > + #interrupt-cells = <3>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + #redistributor-regions = <1>;
>
> A single redistributor is the default, and you don't need to specify
> it in the DT.
>
sure, it's really unnecessary. will remove it.
> > + interrupt-parent = <&gic>;
> > + interrupt-controller;
> > + reg = <0 0x0c000000 0 0x40000>, // distributor
> > + <0 0x0c100000 0 0x200000>; // redistributor
>
> How about the GICv2 compatibility regions, which are provided by the
> CPUs at a fixed offset from PERIPHBASE? See the Cortex-A53 TRM for
> detail, and please add the missing regions.
>
Thanks. will add it soon.
> > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > + };
>
> Thanks,
>
> M.
>
