Re: [PATCH 0/3] Add STM32 SPI support on stm32mp157c

[Alexandre Torgue]

Hi Amélie,

On 05/17/2018 04:21 PM, Amelie Delaunay wrote:

This patch adds STM32 SPI support on stm32mp157c SoC.
SPI1, available on GPIO expansion connector, is kept disabled, so these
pins can be used as GPIOs by default.

Amelie Delaunay (3):
   ARM: dts: stm32: add STM32 SPI support on stm32mp157c
   ARM: dts: stm32: add SPI1 support on stm32mp157c-ev1
   ARM: multi_v7_defconfig: enable STM32 SPI

  arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 16 +++++-
  arch/arm/boot/dts/stm32mp157c-ev1.dts     |  6 +++
  arch/arm/boot/dts/stm32mp157c.dtsi        | 84 +++++++++++++++++++++++++++++++
  arch/arm/configs/multi_v7_defconfig       |  1 +
  4 files changed, 106 insertions(+), 1 deletion(-)

DT patches applied on stm32-next.

Thanks
Alex