Hi! > > I was about to add "facepalm" emoji here, as disabling l2 cache is > > major mistake. OTOH if you also see 20 seconds, then either there is > > another problem, or you need to enable l2 cache, too (and I don't have > > to feel too bad for misconfiguring it). > > OK. I checked and duovero runs only at 600MHz. I can only > get down to 19 seconds with omap2plus_defconfig if I disable > CONFIG_CPU_FREQ so the max speed is maintained from bootloader. > Otherwise it runs at most at 1GHz, I think any higher speeds > need smartreflex and voltage scaling working which we don't > have in the mainline kernel. Not sure what happens with higher > speeds with mainline kernel or if they are unsafe in the long > run. > > Anyways, care to post your .config somewhere so I can see what > the numbers are for me with it?
I'm attaching config I'm using for v4.18. In current boot, bzip2 takes
16 seconds.
user@devuan:~$ time cat /dev/urandom | head -c 10000000 | sudo nice
-n -19 bzip2 -9 - | wc -c
10044705
15.68user 0.53system 15.93 (0m15.931s) elapsed 101.82%CPU
I guess I should go back to v4.17 to get 12 seconds..?!
Confused,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
config.gz
Description: application/gzip
signature.asc
Description: Digital signature
