Am Mittwoch, den 11.07.2018, 09:16 -0600 schrieb Rob Herring:
> On Tue, Jul 10, 2018 at 09:44:15AM +0000, Denis OSTERLAND wrote:
> > 
> > From: Denis Osterland <denis.osterl...@diehl.com>
> > 
> > The devicetree documentation for the ISL1219 device tree
> > binding is added with an short example. It is not a trivial
> > device, because it supports two interrupt souces.
> s/souces/sources/
OK
> 
> > 
> > 
> > Signed-off-by: Denis Osterland <denis.osterl...@diehl.com>
> > ---
> >  .../devicetree/bindings/rtc/isil,isl1219.txt  | 29 +++++++++++++++++++
> >  1 file changed, 29 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/rtc/isil,isl1219.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1219.txt 
> > b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt
> > new file mode 100644
> > index 000000000000..f26f1e9d4bde
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt
> > @@ -0,0 +1,29 @@
> > +Intersil ISL1219 I2C RTC/Alarm chip with event in
> > +
> > +ISL1219 has additional pins EVIN and #EVDET for tamper detection.
> > +
> > +Required properties supported by the device:
> > +
> > + - "compatible": must be "isil,isl1219"
> > + - "reg": I2C bus address of the device
> > +
> > +Optional properties:
> > +
> > + - "interrupt-names": list which may contains "irq" and "evdet"
> > + - "interrupt-parent", "interrupts", "interrupts-extended":
> > +   for passing the interrupt line of the SoC connected to #IRQ pin
> > +   and #EVDET pin of the RTC chip.
> Just list 'interrupts' and how many there are. interrupt-parent is 
> implied and may be in a parent node. interrupts-extended is also 
> implicitly allowed as needed.
Will change to: "interrupts": list of interrupts for "irq" and "evdet"
> 
> > 
> > + - "isil,ev-evienb": if present bit can be set to disable event input 
> > pull-up
> > +
> > +
> > +Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12
> > + and #EVDET pin connected to SoC gpio2 pin 24:
> > +
> > +   isl1219: rtc@68 {
> > +           compatible = "isil,isl1219";
> > +           reg = <0x68>;
> > +           interrupt-names = "irq", "evdet";
> > +           interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>,
> > +                   <&gpio2 24 IRQ_TYPE_EDGE_FALLING>;
> > +   };
> > +
> > --
> > 2.18.0
> > 
> > 
> > 
> > Diehl Connectivity Solutions GmbH
> > Geschäftsführung: Horst Leonberger
> > Sitz der Gesellschaft: Nürnberg - Registergericht: Amtsgericht
> > Nürnberg: HRB 32315
> > ___________________________________________________________________________________________________
> > 
> > Der Inhalt der vorstehenden E-Mail ist nicht rechtlich bindend. Diese 
> > E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen.
> > Informieren Sie uns bitte, wenn Sie diese E-Mail faelschlicherweise 
> > erhalten haben. Bitte loeschen Sie in diesem Fall die Nachricht.
> > Jede unerlaubte Form der Reproduktion, Bekanntgabe, Aenderung, Verteilung 
> > und/oder Publikation dieser E-Mail ist strengstens untersagt.
> > The contents of the above mentioned e-mail is not legally binding. This 
> > e-mail contains confidential and/or legally protected information. Please 
> > inform us if you have received this e-mail by
> > mistake and delete it in such a case. Each unauthorized reproduction, 
> > disclosure, alteration, distribution and/or publication of this e-mail is 
> > strictly prohibited.

Diehl Connectivity Solutions GmbH
Geschäftsführung: Horst Leonberger
Sitz der Gesellschaft: Nürnberg - Registergericht: Amtsgericht
Nürnberg: HRB 32315
___________________________________________________________________________________________________

Der Inhalt der vorstehenden E-Mail ist nicht rechtlich bindend. Diese E-Mail 
enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen.
Informieren Sie uns bitte, wenn Sie diese E-Mail faelschlicherweise erhalten 
haben. Bitte loeschen Sie in diesem Fall die Nachricht.
Jede unerlaubte Form der Reproduktion, Bekanntgabe, Aenderung, Verteilung 
und/oder Publikation dieser E-Mail ist strengstens untersagt.
The contents of the above mentioned e-mail is not legally binding. This e-mail 
contains confidential and/or legally protected information. Please inform us if 
you have received this e-mail by
mistake and delete it in such a case. Each unauthorized reproduction, 
disclosure, alteration, distribution and/or publication of this e-mail is 
strictly prohibited. 

Reply via email to