> Op 12 jul. 2018, om 05:08 heeft Robert Nelson <robertcnel...@gmail.com> het
> volgende geschreven:
>
> On Wed, Jul 11, 2018 at 8:31 AM, Tony Lindgren <t...@atomide.com> wrote:
>> * Koen Kooi <k...@dominion.thruhere.net> [180711 07:36]:
>>> +&cpu0_opp_table {
>>> + /*
>>> + * All PG 2.0 silicon may not support 1GHz but some of the early
>>> + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
>>> + * to support 1GHz OPP so enable it for PG 2.0 on this board.
>>> + */
>>> + oppnitro-1000000000 {
>>> + opp-supported-hw = <0x06 0x0100>;
>>> + };
>>> +};
>>
>> Is the above valid for new boards or should it be just
>> dropped? Or is the comment just out of date?
>
> For SanCloud, this can be dropped, they got normal 1Ghz parts from TI.
>
> and they aren't using the Octavo SIP which didn't have the 1Ghz efuse set..
>
> So just the normal am335x errata, nothing special required in it’s dts...
Thanks for the info! I’ll send a v3 with that bit removed shortly after I
figure out what trips up kbuild.
regards,
Koen
