On 05-07-18, 10:39, Viresh Kumar wrote:
> Allow cooling devices sharing same trip point with same contribution
> value to share the cooling map as well. Otherwise the same information
> will be duplicated for each device sharing the trip point.
>
> Signed-off-by: Viresh Kumar <viresh.ku...@linaro.org>
> ---
> Documentation/devicetree/bindings/thermal/thermal.txt | 11 +++--------
> 1 file changed, 3 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt
> b/Documentation/devicetree/bindings/thermal/thermal.txt
> index cc553f0952c5..eb7ee91556a5 100644
> --- a/Documentation/devicetree/bindings/thermal/thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/thermal.txt
> @@ -97,8 +97,8 @@ get assigned to trip points of the zone. The cooling
> devices are expected
> to be loaded in the target system.
>
> Required properties:
> -- cooling-device: A phandle of a cooling device with its specifier,
> - Type: phandle + referring to which cooling device is used in this
> +- cooling-device: A list of phandles of cooling devices with their
> specifiers,
> + Type: phandle + referring to which cooling devices are used in this
> cooling specifier binding. In the cooling specifier, the first
> cell
> is the minimum cooling state and the second cell
> is the maximum cooling state used in this map.
> @@ -276,12 +276,7 @@ thermal-zones {
> };
> map1 {
> trip = <&cpu_alert1>;
> - cooling-device = <&fan0 5 THERMAL_NO_LIMIT>;
> - };
> - map2 {
> - trip = <&cpu_alert1>;
> - cooling-device =
> - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + cooling-device = <&fan0 5 THERMAL_NO_LIMIT>,
> <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
> };
> };
Any objections to this ? Can you guys provide Acks ?
--
viresh
