* Koen Kooi <k...@dominion.thruhere.net> [180717 06:28]:
> +&i2c0 {
> + lps331ap: barometer@5c {
> + compatible = "st,lps331ap-press";
> + st,drdy-int-pin = <1>;
> + reg = <0x5c>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <26 IRQ_TYPE_EDGE_RISING>;
> + };
> +
> + mpu6050: accelerometer@68 {
> + compatible = "invensense,mpu6050";
> + reg = <0x68>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <2 IRQ_TYPE_EDGE_RISING>;
> + orientation = <0xff 0 0 0 1 0 0 0 0xff>;
> + };
> +
> + usb2512b@2c {
> + compatible = "microchip,usb2512b";
> + reg = <0x2c>;
> + reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
> + /* wifi on port 4 */
> + };
> +};
Thanks for updating it, should the last one be usb-hub@2c?
Regards,
Tony
