On 17 July 2018 at 12:12, Anand Moon <linux.am...@gmail.com> wrote: > increase the number of trips to support more polling modes, > changes help supress following warning. > > [ 4.231731] thermal thermal_zone0: failed to read out thermal zone (-22) > [ 4.237190] exynos-tmu 10060000.tmu: More trip points than supported by > this TMU. > [ 4.244661] exynos-tmu 10060000.tmu: 2 trip points should be configured in > polling mode. > [ 4.254821] thermal thermal_zone1: failed to read out thermal zone (-22) > [ 4.260370] exynos-tmu 10064000.tmu: More trip points than supported by > this TMU. > [ 4.267631] exynos-tmu 10064000.tmu: 2 trip points should be configured in > polling mode. > [ 4.277551] thermal thermal_zone2: failed to read out thermal zone (-22) > [ 4.283090] exynos-tmu 10068000.tmu: More trip points than supported by > this TMU. > [ 4.290438] exynos-tmu 10068000.tmu: 2 trip points should be configured in > polling mode. > [ 4.300280] thermal thermal_zone3: failed to read out thermal zone (-22) > [ 4.305711] exynos-tmu 1006c000.tmu: More trip points than supported by > this TMU. > [ 4.313171] exynos-tmu 1006c000.tmu: 2 trip points should be configured in > polling mode. > [ 4.323002] thermal thermal_zone4: failed to read out thermal zone (-22) > > CC: Bartlomiej Zolnierkiewicz <b.zolnier...@samsung.com> > Signed-off-by: Anand Moon <linux.am...@gmail.com>
NAK Exynos5420/5422/5800 has 4 trip points (understood as in current driver design). Best regards, Krzysztof > --- > drivers/thermal/samsung/exynos_tmu.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/thermal/samsung/exynos_tmu.c > b/drivers/thermal/samsung/exynos_tmu.c > index 2dbde97..4a2733c 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -935,7 +935,7 @@ static int exynos_map_dt_data(struct platform_device > *pdev) > data->tmu_read = exynos4412_tmu_read; > data->tmu_set_emulation = exynos4412_tmu_set_emulation; > data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; > - data->ntrip = 4; > + data->ntrip = 8; > data->gain = 8; > data->reference_voltage = 16; > data->efuse_value = 55; > -- > 2.7.4 >
