On 2018-07-19 01:14, Bjorn Helgaas wrote:
This is a v3 of Oza's patches [1]. It's available at [2] if you prefer
git.
v3 changes:
- Add pci_aer_clear_fatal_status() to clear ERR_FATAL bits, only
called
from pcie_do_fatal_recovery(). Moved to first in series to avoid a
window where ERR_FATAL recovery only clears ERR_NONFATAL bits.
Visible
only inside the PCI core.
- Instead of having pci_cleanup_aer_uncorrect_error_status() do
different
things based on dev->error_state, use this only for ERR_NONFATAL
bits.
I didn't change the name because it's used by many drivers.
- Rename pci_cleanup_aer_error_device_status() to
pci_aer_clear_device_status(), make it void, and make it visible
only
inside the PCI core.
- Remove pcie_portdrv_err_handler.slot_reset altogether instead of
making
it a stub function. Possibly pcie_portdrv_err_handler could be
removed
completely?
[1]
https://lkml.kernel.org/r/1529661494-20936-1-git-send-email-p...@codeaurora.org
[2]
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/?h=pci/06-22-oza-aer
---
Bjorn Helgaas (1):
PCI/AER: Clear only ERR_FATAL status bits during fatal recovery
Oza Pawandeep (6):
PCI/AER: Clear only ERR_NONFATAL bits during non-fatal recovery
PCI/AER: Factor out ERR_NONFATAL status bit clearing
PCI/AER: Remove ERR_FATAL code from ERR_NONFATAL path
PCI/AER: Clear device status bits during ERR_FATAL and
ERR_NONFATAL
PCI/AER: Clear device status bits during ERR_COR handling
PCI/portdrv: Remove pcie_portdrv_err_handler.slot_reset
drivers/pci/pci.h | 5 ++++
drivers/pci/pcie/aer.c | 47
+++++++++++++++++++++++++++-------------
drivers/pci/pcie/err.c | 15 +++++--------
drivers/pci/pcie/portdrv_pci.c | 25 ---------------------
4 files changed, 43 insertions(+), 49 deletions(-)
Hi Bjorn,
I am planning on some things to do after this series.
your text
"
1) I don't think the driver slot_reset callbacks should be responsible
for clearing these AER status bits. Can we clear them somewhere in
the pcie_do_nonfatal_recovery() path and remove these calls from the
drivers?
"
Oza: We can do following
broadcast_error_message()
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
should do
pci_walk_bus(dev->subordinate,
pci_cleanup_aer_uncorrect_error_status, NULL);
and update all the drivers and remove the call
pci_cleanup_aer_uncorrect_error_status()
2) In principle, we should only read PCI_ERR_UNCOR_STATUS *once* per
device when handling an error. We currently read it three times:
aer_isr
aer_isr_one_error
find_source_device
find_device_iter
is_error_source
read PCI_ERR_UNCOR_STATUS # 1
Oza: this is the first legitimate read
aer_process_err_devices
get_device_error_info(e_info->dev[i])
read PCI_ERR_UNCOR_STATUS # 2
Oza: I see this read used to check if link is healthy so the purpose of
this read looks different to me.
handle_error_source
pcie_do_nonfatal_recovery
...
report_slot_reset
driver->err_handler->slot_reset
pci_cleanup_aer_uncorrect_error_status
read PCI_ERR_UNCOR_STATUS # 3
Oza: pci_cleanup_aer_uncorrect_error_status() is generic and able to
clear status.
for e.g. in point 4 as I suggested if we have to do
pci_walk_bus(dev->subordinate, pci_cleanup_aer_uncorrect_error_status,
NULL); then we have to read them.
3) we need to get rid of pci_channel_io_frozen permanently.
Regards,
Oza.
