On Thu, Jul 19, 2018 at 03:51:57PM +0900, Keiji Hayashibara wrote: This all looks good, just a small number of fairly minor things - mostly style points.
> @@ -0,0 +1,532 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * spi-uniphier.c - Socionext UniPhier SPI controller driver
> + *
> + * Copyright 2012 Panasonic Corporation
> + * Copyright 2016-2018 Socionext Inc.
> + */
Please make the entire comment a C++ one, it makes things look a bit
more joined up/intentional.
> +#define BYTES_PER_WORD(x) \
> +({ \
> + int __x; \
> + __x = (x <= 8) ? 1 : \
> + (x <= 16) ? 2 : 4; \
> + __x; \
> +})
Could this be replaced with an inline function? The usage seems fine
but it's a bit big for a macro. The end result should be similar.
> +static irqreturn_t uniphier_spi_handler(int irq, void *dev_id)
> +{
> + struct uniphier_spi_priv *priv = dev_id;
> + u32 val, stat;
> +
> + stat = readl(priv->base + SSI_IS);
> + val = SSI_IC_TCIC | SSI_IC_RCIC | SSI_IC_RORIC;
> + writel(val, priv->base + SSI_IC);
> +
> + /* rx fifo overrun */
> + if (stat & SSI_IS_RORID) {
> + priv->error = -EIO;
> + goto done;
> + }
> +
> + /* rx complete */
> + if ((stat & SSI_IS_RCID) && (stat & SSI_IS_RXRS)) {
> + }
> +
> + return IRQ_HANDLED;
> +
> +done:
> + complete(&priv->xfer_done);
> + return IRQ_HANDLED;
This will unconditionally report IRQ_HANDLED even if none of the flags
were set by the hardware which will cause problems if something goes
wrong - the interrupt will continually be serviced and the interrupt
framework won't be able to mitigate or provide diagnostics. It's better
to return IRQ_NONE if nothing is detected from the hardware.
> +static const struct of_device_id uniphier_spi_match[] = {
> + { .compatible = "socionext,uniphier-scssi", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, uniphier_spi_match);
The binding document also listed socionext,uniphier-mcssi as a
compatible but this driver doesn't match that.
signature.asc
Description: PGP signature
