[PATCH v3 21/33] mtd: rawnand: sunxi: convert driver to nand_scan()

[Miquel Raynal]

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
---
 drivers/mtd/nand/raw/sunxi_nand.c | 43 +++++++++++++++++----------------------
 1 file changed, 19 insertions(+), 24 deletions(-)

diff --git a/drivers/mtd/nand/raw/sunxi_nand.c 
b/drivers/mtd/nand/raw/sunxi_nand.c
index 07f3ff9a28f2..de2bf752142b 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1816,12 +1816,21 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl 
*ecc)
        }
 }
 
-static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
-                              struct device_node *np)
+static int sunxi_nand_attach_chip(struct nand_chip *nand)
 {
-       struct nand_chip *nand = mtd_to_nand(mtd);
+       struct mtd_info *mtd = nand_to_mtd(nand);
+       struct nand_ecc_ctrl *ecc = &nand->ecc;
+       struct device_node *np = nand_get_flash_node(nand);
        int ret;
 
+       if (nand->bbt_options & NAND_BBT_USE_FLASH)
+               nand->bbt_options |= NAND_BBT_NO_OOB;
+
+       if (nand->options & NAND_NEED_SCRAMBLING)
+               nand->options |= NAND_NO_SUBPAGE_WRITE;
+
+       nand->options |= NAND_SUBPAGE_READ;
+
        if (!ecc->size) {
                ecc->size = nand->ecc_step_ds;
                ecc->strength = nand->ecc_strength_ds;
@@ -1846,6 +1855,10 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, 
struct nand_ecc_ctrl *ecc,
        return 0;
 }
 
+static struct nand_controller_ops sunxi_nand_controller_ops = {
+       .attach_chip = sunxi_nand_attach_chip,
+};
+
 static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
                                struct device_node *np)
 {
@@ -1911,6 +1924,8 @@ static int sunxi_nand_chip_init(struct device *dev, 
struct sunxi_nfc *nfc,
        /* Default tR value specified in the ONFI spec (chapter 4.15.1) */
        nand->chip_delay = 200;
        nand->controller = &nfc->controller;
+       nand->controller->ops = &sunxi_nand_controller_ops;
+
        /*
         * Set the ECC mode to the default value in case nothing is specified
         * in the DT.
@@ -1927,30 +1942,10 @@ static int sunxi_nand_chip_init(struct device *dev, 
struct sunxi_nfc *nfc,
        mtd = nand_to_mtd(nand);
        mtd->dev.parent = dev;
 
-       ret = nand_scan_ident(mtd, nsels, NULL);
+       ret = nand_scan(mtd, nsels);
        if (ret)
                return ret;
 
-       if (nand->bbt_options & NAND_BBT_USE_FLASH)
-               nand->bbt_options |= NAND_BBT_NO_OOB;
-
-       if (nand->options & NAND_NEED_SCRAMBLING)
-               nand->options |= NAND_NO_SUBPAGE_WRITE;
-
-       nand->options |= NAND_SUBPAGE_READ;
-
-       ret = sunxi_nand_ecc_init(mtd, &nand->ecc, np);
-       if (ret) {
-               dev_err(dev, "ECC init failed: %d\n", ret);
-               return ret;
-       }
-
-       ret = nand_scan_tail(mtd);
-       if (ret) {
-               dev_err(dev, "nand_scan_tail failed: %d\n", ret);
-               return ret;
-       }
-
        ret = mtd_device_register(mtd, NULL, 0);
        if (ret) {
                dev_err(dev, "failed to register mtd device: %d\n", ret);
-- 
2.14.1