[PATCH v3 01/33] mtd: rawnand: brcmnand: convert driver to nand_scan()

[Miquel Raynal]

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c | 47 +++++++++++++++++++-------------
 1 file changed, 28 insertions(+), 19 deletions(-)

diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c 
b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 2e5efa0f9ea2..4a69c13c83f4 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2208,6 +2208,32 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
        return 0;
 }
 
+static int brcmnand_attach_chip(struct nand_chip *chip)
+{
+       struct mtd_info *mtd = nand_to_mtd(chip);
+       struct brcmnand_host *host = nand_get_controller_data(chip);
+       int ret;
+
+       if (chip->bbt_options & NAND_BBT_USE_FLASH)
+               chip->bbt_options |= NAND_BBT_NO_OOB;
+
+       if (brcmnand_setup_dev(host))
+               return -ENXIO;
+
+       chip->ecc.size = host->hwcfg.sector_size_1k ? 1024 : 512;
+
+       /* only use our internal HW threshold */
+       mtd->bitflip_threshold = 1;
+
+       ret = brcmstb_choose_ecc_layout(host);
+
+       return ret;
+}
+
+static struct nand_controller_ops brcmnand_controller_ops = {
+       .attach_chip = brcmnand_attach_chip,
+};
+
 static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
 {
        struct brcmnand_controller *ctrl = host->ctrl;
@@ -2267,10 +2293,6 @@ static int brcmnand_init_cs(struct brcmnand_host *host, 
struct device_node *dn)
        nand_writereg(ctrl, cfg_offs,
                      nand_readreg(ctrl, cfg_offs) & ~CFG_BUS_WIDTH);
 
-       ret = nand_scan_ident(mtd, 1, NULL);
-       if (ret)
-               return ret;
-
        chip->options |= NAND_NO_SUBPAGE_WRITE;
        /*
         * Avoid (for instance) kmap()'d buffers from JFFS2, which we can't DMA
@@ -2279,21 +2301,7 @@ static int brcmnand_init_cs(struct brcmnand_host *host, 
struct device_node *dn)
         */
        chip->options |= NAND_USE_BOUNCE_BUFFER;
 
-       if (chip->bbt_options & NAND_BBT_USE_FLASH)
-               chip->bbt_options |= NAND_BBT_NO_OOB;
-
-       if (brcmnand_setup_dev(host))
-               return -ENXIO;
-
-       chip->ecc.size = host->hwcfg.sector_size_1k ? 1024 : 512;
-       /* only use our internal HW threshold */
-       mtd->bitflip_threshold = 1;
-
-       ret = brcmstb_choose_ecc_layout(host);
-       if (ret)
-               return ret;
-
-       ret = nand_scan_tail(mtd);
+       ret = nand_scan(mtd, 1);
        if (ret)
                return ret;
 
@@ -2434,6 +2442,7 @@ int brcmnand_probe(struct platform_device *pdev, struct 
brcmnand_soc *soc)
        init_completion(&ctrl->done);
        init_completion(&ctrl->dma_done);
        nand_controller_init(&ctrl->controller);
+       ctrl->controller.ops = &brcmnand_controller_ops;
        INIT_LIST_HEAD(&ctrl->host_list);
 
        /* NAND register range */
-- 
2.14.1