Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
---
 drivers/mtd/nand/raw/fsl_elbc_nand.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c 
b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index 0aa54a949653..44893e49b386 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -637,9 +637,9 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct 
nand_chip *chip)
        return (elbc_fcm_ctrl->mdr & 0xff) | NAND_STATUS_WP;
 }
 
-static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
+static int fsl_elbc_attach_chip(struct nand_chip *chip)
 {
-       struct nand_chip *chip = mtd_to_nand(mtd);
+       struct mtd_info *mtd = nand_to_mtd(chip);
        struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
        struct fsl_lbc_ctrl *ctrl = priv->ctrl;
        struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
@@ -706,6 +706,10 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
        return 0;
 }
 
+static const struct nand_controller_ops fsl_elbc_controller_ops = {
+       .attach_chip = fsl_elbc_attach_chip,
+};
+
 static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
                              uint8_t *buf, int oob_required, int page)
 {
@@ -910,15 +914,8 @@ static int fsl_elbc_nand_probe(struct platform_device 
*pdev)
        if (ret)
                goto err;
 
-       ret = nand_scan_ident(mtd, 1, NULL);
-       if (ret)
-               goto err;
-
-       ret = fsl_elbc_chip_init_tail(mtd);
-       if (ret)
-               goto err;
-
-       ret = nand_scan_tail(mtd);
+       priv->chip.controller->ops = &fsl_elbc_controller_ops;
+       ret = nand_scan(mtd, 1);
        if (ret)
                goto err;
 
-- 
2.14.1

Reply via email to