Am Dienstag, den 24.07.2018, 01:46 +0800 schrieb Robin Gong:
> If multi-bds used in one transfer, all bds should be consisten
> memory.To easily follow it, enlarge the dma pool size into 20 bds,
> and it will report error if the number of bds is over than 20. For
> dmatest, the max count for single transfer is NUM_BD *
> SDMA_BD_MAX_CNT = 20 * 65535 = ~1.28MB.
Both the commit message and the comment need a lot more care to
actually tell what this commit is trying to achieve. Currently I don't
follow at all. What does "consisten" mean? Do you mean BDs should be
contiguous in memory?
What do you gain by over-allocating each BD by a factor of 20?
Regards,
Lucas
> Signed-off-by: Robin Gong <yibin.g...@nxp.com>
> ---
> drivers/dma/imx-sdma.c | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index b4ec2d2..5973489 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -298,6 +298,15 @@ struct sdma_context_data {
> > u32 scratch7;
> } __attribute__ ((packed));
>
> +/*
> + * All bds in one transfer should be consitent on SDMA. To easily follow
> it,just
> + * set the dma pool size as the enough bds. For example, in dmatest case, the
> + * max 20 bds means the max for single transfer is NUM_BD * SDMA_BD_MAX_CNT
> = 20
> + * * 65535 = ~1.28MB. 20 bds supposed to be enough basically.If it's still
> not
> + * enough in some specific cases, enlarge it here.Warning message would also
> + * appear if the bd numbers is over than 20.
> + */
> +#define NUM_BD 20
>
> struct sdma_engine;
>
> @@ -1273,7 +1282,7 @@ static int sdma_alloc_chan_resources(struct dma_chan
> *chan)
> > goto disable_clk_ahb;
>
> > sdmac->bd_pool = dma_pool_create("bd_pool", chan->device->dev,
> > - sizeof(struct sdma_buffer_descriptor),
> > + NUM_BD * sizeof(struct sdma_buffer_descriptor),
> > 32, 0);
>
> > return 0;
> @@ -1314,6 +1323,12 @@ static struct sdma_desc *sdma_transfer_init(struct
> sdma_channel *sdmac,
> {
> > struct sdma_desc *desc;
>
> > + if (bds > NUM_BD) {
> > + dev_err(sdmac->sdma->dev, "%d bds exceed the max %d\n",
> > + bds, NUM_BD);
> > + goto err_out;
> > + }
> +
> > desc = kzalloc((sizeof(*desc)), GFP_NOWAIT);
> > if (!desc)
> > goto err_out;
