Add some debugging to be able to check the proper initialization
of the BQ25896 part.
Enable the BQ25896 part.
Add 2 new parameters "voltage_now" and "model_name".
Signed-off-by: Angus Ainslie <angus.ains...@puri.sm>
---
drivers/power/supply/bq25890_charger.c | 68 ++++++++++++++++++++++----
1 file changed, 58 insertions(+), 10 deletions(-)
diff --git a/drivers/power/supply/bq25890_charger.c
b/drivers/power/supply/bq25890_charger.c
index 8e2c41ded171..32cdae15ce40 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -32,6 +32,7 @@
#define BQ25890_IRQ_PIN "bq25890_irq"
#define BQ25890_ID 3
+#define BQ25896_ID 0
enum bq25890_fields {
F_EN_HIZ, F_EN_ILIM, F_IILIM, /* Reg00 */
@@ -153,8 +154,8 @@ static const struct reg_field bq25890_reg_fields[] = {
[F_CONV_RATE] = REG_FIELD(0x02, 6, 6),
[F_BOOSTF] = REG_FIELD(0x02, 5, 5),
[F_ICO_EN] = REG_FIELD(0x02, 4, 4),
- [F_HVDCP_EN] = REG_FIELD(0x02, 3, 3),
- [F_MAXC_EN] = REG_FIELD(0x02, 2, 2),
+ [F_HVDCP_EN] = REG_FIELD(0x02, 3, 3), // reserved on BQ25896
+ [F_MAXC_EN] = REG_FIELD(0x02, 2, 2), // reserved on BQ25896
[F_FORCE_DPM] = REG_FIELD(0x02, 1, 1),
[F_AUTO_DPDM_EN] = REG_FIELD(0x02, 0, 0),
/* REG03 */
@@ -163,6 +164,7 @@ static const struct reg_field bq25890_reg_fields[] = {
[F_OTG_CFG] = REG_FIELD(0x03, 5, 5),
[F_CHG_CFG] = REG_FIELD(0x03, 4, 4),
[F_SYSVMIN] = REG_FIELD(0x03, 1, 3),
+ /* MIN_VBAT_SEL on BQ25896 */
/* REG04 */
[F_PUMPX_EN] = REG_FIELD(0x04, 7, 7),
[F_ICHG] = REG_FIELD(0x04, 0, 6),
@@ -181,7 +183,7 @@ static const struct reg_field bq25890_reg_fields[] = {
[F_CHG_TMR] = REG_FIELD(0x07, 1, 2),
[F_JEITA_ISET] = REG_FIELD(0x07, 0, 0),
/* REG08 */
- [F_BATCMP] = REG_FIELD(0x08, 6, 7),
+ [F_BATCMP] = REG_FIELD(0x08, 6, 7), // 5-7 on BQ25896
[F_VCLAMP] = REG_FIELD(0x08, 2, 4),
[F_TREG] = REG_FIELD(0x08, 0, 1),
/* REG09 */
@@ -195,12 +197,13 @@ static const struct reg_field bq25890_reg_fields[] = {
[F_PUMPX_DN] = REG_FIELD(0x09, 0, 0),
/* REG0A */
[F_BOOSTV] = REG_FIELD(0x0A, 4, 7),
+ /* PFM_OTG_DIS 3 on BQ25896 */
[F_BOOSTI] = REG_FIELD(0x0A, 0, 2),
/* REG0B */
[F_VBUS_STAT] = REG_FIELD(0x0B, 5, 7),
[F_CHG_STAT] = REG_FIELD(0x0B, 3, 4),
[F_PG_STAT] = REG_FIELD(0x0B, 2, 2),
- [F_SDP_STAT] = REG_FIELD(0x0B, 1, 1),
+ [F_SDP_STAT] = REG_FIELD(0x0B, 1, 1), // reserved on BQ25896
[F_VSYS_STAT] = REG_FIELD(0x0B, 0, 0),
/* REG0C */
[F_WD_FAULT] = REG_FIELD(0x0C, 7, 7),
@@ -401,6 +404,18 @@ static int bq25890_power_supply_get_property(struct
power_supply *psy,
val->strval = BQ25890_MANUFACTURER;
break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ bq->chip_id = bq25890_field_read(bq, F_PN);
+
+ if (bq->chip_id == BQ25890_ID)
+ val->strval = "BQ25890";
+ else if (bq->chip_id == BQ25896_ID)
+ val->strval = "BQ25896";
+ else
+ val->strval = "UNKNOWN";
+
+ break;
+
case POWER_SUPPLY_PROP_ONLINE:
val->intval = state.online;
break;
@@ -453,6 +468,20 @@ static int bq25890_power_supply_get_property(struct
power_supply *psy,
val->intval = bq25890_find_val(bq->init_data.iterm, TBL_ITERM);
break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (!state.online) {
+ val->intval = 0;
+ break;
+ }
+
+ ret = bq25890_field_read(bq, F_SYSV); /* read measured value */
+ if (ret < 0)
+ return ret;
+
+ /* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */
+ val->intval = 2304000 + ret * 20000;
+ break;
+
default:
return -EINVAL;
}
@@ -608,30 +637,43 @@ static int bq25890_hw_init(struct bq25890_device *bq)
};
ret = bq25890_chip_reset(bq);
- if (ret < 0)
+ if (ret < 0) {
+ dev_dbg(bq->dev, "BQ259x reset failed %d\n", ret);
return ret;
+ }
/* disable watchdog */
ret = bq25890_field_write(bq, F_WD, 0);
- if (ret < 0)
+ if (ret < 0) {
+ dev_dbg(bq->dev, "disabling watchdog failed %d\n", ret );
return ret;
+ }
/* initialize currents/voltages and other parameters */
for (i = 0; i < ARRAY_SIZE(init_data); i++) {
ret = bq25890_field_write(bq, init_data[i].id,
init_data[i].value);
- if (ret < 0)
+ if (ret < 0) {
+ dev_dbg(bq->dev, "writing init data failed %d\n",
+ ret);
return ret;
+ }
}
/* Configure ADC for continuous conversions. This does not enable it. */
ret = bq25890_field_write(bq, F_CONV_RATE, 1);
- if (ret < 0)
+ if (ret < 0) {
+ dev_dbg(bq->dev, "Config ADC failed %d\n",
+ ret);
return ret;
+ }
ret = bq25890_get_chip_state(bq, &state);
- if (ret < 0)
+ if (ret < 0) {
+ dev_dbg(bq->dev, "BQ2589x get state failed %d\n",
+ ret);
return ret;
+ }
mutex_lock(&bq->lock);
bq->state = state;
@@ -644,12 +686,14 @@ static enum power_supply_property
bq25890_power_supply_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
};
static char *bq25890_charger_supplied_to[] = {
@@ -767,6 +811,9 @@ static int bq25890_fw_read_u32_props(struct bq25890_device
*bq)
if (props[i].optional)
continue;
+ printk( KERN_ERR "unable to read property %d %s\n", ret
+ , props[i].name );
+
return ret;
}
@@ -840,7 +887,7 @@ static int bq25890_probe(struct i2c_client *client,
return bq->chip_id;
}
- if (bq->chip_id != BQ25890_ID) {
+ if ((bq->chip_id != BQ25890_ID) && (bq->chip_id != BQ25896_ID)) {
dev_err(dev, "Chip with ID=%d, not supported!\n", bq->chip_id);
return -ENODEV;
}
@@ -966,6 +1013,7 @@ MODULE_DEVICE_TABLE(i2c, bq25890_i2c_ids);
static const struct of_device_id bq25890_of_match[] = {
{ .compatible = "ti,bq25890", },
+ { .compatible = "ti,bq25896", },
{ },
};
MODULE_DEVICE_TABLE(of, bq25890_of_match);
--
2.17.1
