On Mon, Jul 09, 2018 at 11:43:03AM +0200, Esben Haabendal wrote:
> From: Esben Haabendal <e...@deif.com>
>
> Always update the stopped state when busy status have been checked.
> This is identical to what was done before, with the exception of error
> handling.
> Without this change, some errors cause the stopped state to be left in
> incorrect state in i2c_imx_stop(), i2c_imx_dma_read(), i2c_imx_read() and
> i2c_imx_xfer().
>
> Signed-off-by: Esben Haabendal <e...@deif.com>
> ---
> drivers/i2c/busses/i2c-imx.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index d86f152176a4..1db8e6790afc 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -421,10 +421,14 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct
> *i2c_imx, int for_busy)
> return -EAGAIN;
> }
>
> - if (for_busy && (temp & I2SR_IBB))
> + if (for_busy && (temp & I2SR_IBB)) {
> + i2c_imx->stopped = 0;
> break;
> - if (!for_busy && !(temp & I2SR_IBB))
> + }
> + if (!for_busy && !(temp & I2SR_IBB)) {
> + i2c_imx->stopped = 1;
> break;
> + }
Would it make sense to assign to ->stopped independent of for_busy?
> if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
> dev_dbg(&i2c_imx->adapter.dev,
> "<%s> I2C bus is busy\n", __func__);
> @@ -538,7 +542,6 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
> result = i2c_imx_bus_busy(i2c_imx, 1);
> if (result)
> return result;
> - i2c_imx->stopped = 0;
>
> temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
> temp &= ~I2CR_DMAEN;
> @@ -569,7 +572,6 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
>
> if (!i2c_imx->stopped) {
> i2c_imx_bus_busy(i2c_imx, 0);
> - i2c_imx->stopped = 1;
> }
The braces can go away here.
>
> /* Disable I2C controller */
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
