On Wed, 25 Jul 2018 17:47:49 +0800 Jisheng Zhang wrote:

> When using DMA, if the DMA addr spans 128MB boundary, we have to split
> the DMA transfer into two so that each one doesn't exceed the boundary.
> 
> Signed-off-by: Jisheng Zhang <jisheng.zh...@synaptics.com>
> ---
>  drivers/mmc/host/sdhci-of-dwcmshc.c | 41 +++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c 
> b/drivers/mmc/host/sdhci-of-dwcmshc.c
> index 1b7cd144fb01..01b5cb772554 100644
> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> @@ -13,16 +13,45 @@
>  
>  #include "sdhci-pltfm.h"
>  
> +#define BOUNDARY_OK(addr, len) \
> +     ((addr | (SZ_128M - 1)) == ((addr + len) | (SZ_128M - 1)))

this should be
((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))

> +
>  struct dwcmshc_priv {
>       struct clk      *bus_clk;
>  };
>  
> +/*
> + * if DMA addr spans 128MB boundary, we split the DMA transfer into two
> + * so that the DMA transfer doesn't exceed the boundary.
> + */
> +static unsigned int dwcmshc_adma_write_desc(struct sdhci_host *host,
> +                                         void *desc, dma_addr_t addr,
> +                                         int len, unsigned int cmd)
> +{
> +     int tmplen, offset;
> +
> +     if (BOUNDARY_OK(addr, len))
> +             return _sdhci_adma_write_desc(host, desc, addr, len, cmd);
> +
> +     offset = addr & (SZ_128M - 1);
> +     tmplen = SZ_128M - offset;
> +     _sdhci_adma_write_desc(host, desc, addr, tmplen, cmd);
> +
> +     addr += tmplen;
> +     len -= tmplen;
> +     desc += host->desc_sz;
> +     _sdhci_adma_write_desc(host, desc, addr, len, cmd);
> +
> +     return host->desc_sz * 2;
> +}
> +
>  static const struct sdhci_ops sdhci_dwcmshc_ops = {
>       .set_clock              = sdhci_set_clock,
>       .set_bus_width          = sdhci_set_bus_width,
>       .set_uhs_signaling      = sdhci_set_uhs_signaling,
>       .get_max_clock          = sdhci_pltfm_clk_get_max_clock,
>       .reset                  = sdhci_reset,
> +     .adma_write_desc        = dwcmshc_adma_write_desc,
>  };
>  
>  static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = {
> @@ -36,12 +65,24 @@ static int dwcmshc_probe(struct platform_device *pdev)
>       struct sdhci_host *host;
>       struct dwcmshc_priv *priv;
>       int err;
> +     u32 extra;
>  
>       host = sdhci_pltfm_init(pdev, &sdhci_dwcmshc_pdata,
>                               sizeof(struct dwcmshc_priv));
>       if (IS_ERR(host))
>               return PTR_ERR(host);
>  
> +     /*
> +      * The DMA descriptor table number is calculated as the maximum
> +      * number of segments times 2, to allow for an alignment
> +      * descriptor for each segment, plus 1 for a nop end descriptor,
> +      * plus extra number for cross 128M boundary handling.
> +      */
> +     extra = totalram_pages / (SZ_128M / PAGE_SIZE) + 1;

will use DIV_ROUND_UP instead.

> +     if (extra > SDHCI_MAX_SEGS)
> +             extra = SDHCI_MAX_SEGS;
> +     host->adma_table_num = SDHCI_MAX_SEGS * 2 + 1 + extra;
> +
>       pltfm_host = sdhci_priv(host);
>       priv = sdhci_pltfm_priv(pltfm_host);
>  

Reply via email to