> -----Original Message-----
> From: Oleksij Rempel [mailto:o.rem...@pengutronix.de]
> Sent: 2018年7月26日 17:22
> To: Shawn Guo <shawn...@kernel.org>; Mark Brown <broo...@kernel.org>;
> Rafael J. Wysocki <rafael.j.wyso...@intel.com>
> Cc: Oleksij Rempel <o.rem...@pengutronix.de>; ker...@pengutronix.de;
> devicet...@vger.kernel.org; linux-arm-ker...@lists.infradead.org;
> linux-...@vger.kernel.org; linux-kernel@vger.kernel.org; Andrew Morton
> <a...@linux-foundation.org>; Liam Girdwood <lgirdw...@gmail.com>;
> Leonard Crestez <leonard.cres...@nxp.com>; Rob Herring
> <robh...@kernel.org>; Mark Rutland <mark.rutl...@arm.com>; Michael
> Turquette <mturque...@baylibre.com>; Stephen Boyd
> <sb...@codeaurora.org>; Fabio Estevam <fabio.este...@nxp.com>; Russell
> King <li...@armlinux.org.uk>; dl-linux-imx <linux-...@nxp.com>; Robin Gong
> <yibin.g...@nxp.com>; A.s. Dong <aisheng.d...@nxp.com>
> Subject: [PATCH v8 5/6] regulator: pfuze100-regulator: provide
> pm_power_off_prepare handler
>
> On some boards the SoC can use one pin "PMIC_STBY_REQ" to notify th PMIC
> about state changes. In this case internal state of PMIC must be preconfigured
> for upcomming state change.
> It works fine with the current regulator framework, except with the power-off
> case.
>
> This patch is providing an optional pm_power_off_prepare handler which will
> configure standby state of the PMIC to disable all power lines.
>
> In my power consumption test on RIoTBoard, I got the following results:
> power off without this patch: 320 mA
> power off with this patch: 2 mA
> suspend to ram: 40 mA
>
> Signed-off-by: Oleksij Rempel <o.rem...@pengutronix.de>
> ---
> drivers/regulator/pfuze100-regulator.c | 92 ++++++++++++++++++++++++++
> 1 file changed, 92 insertions(+)
>
> diff --git a/drivers/regulator/pfuze100-regulator.c
> b/drivers/regulator/pfuze100-regulator.c
> index 8d9dbcc775ea..e386e9acb3f7 100644
> --- a/drivers/regulator/pfuze100-regulator.c
> +++ b/drivers/regulator/pfuze100-regulator.c
> @@ -15,6 +15,7 @@
> #include <linux/regulator/pfuze100.h>
> #include <linux/i2c.h>
> #include <linux/slab.h>
> +#include <linux/kallsyms.h>
Is it necessary?
> #include <linux/regmap.h>
>
> #define PFUZE_NUMREGS 128
> @@ -29,11 +30,17 @@
>
> #define PFUZE100_COINVOL 0x1a
> #define PFUZE100_SW1ABVOL 0x20
> +#define PFUZE100_SW1ABMODE 0x23
> #define PFUZE100_SW1CVOL 0x2e
> +#define PFUZE100_SW1CMODE 0x31
> #define PFUZE100_SW2VOL 0x35
> +#define PFUZE100_SW2MODE 0x38
> #define PFUZE100_SW3AVOL 0x3c
> +#define PFUZE100_SW3AMODE 0x3f
> #define PFUZE100_SW3BVOL 0x43
> +#define PFUZE100_SW3BMODE 0x46
> #define PFUZE100_SW4VOL 0x4a
> +#define PFUZE100_SW4MODE 0x4d
> #define PFUZE100_SWBSTCON1 0x66
> #define PFUZE100_VREFDDRCON 0x6a
> #define PFUZE100_VSNVSVOL 0x6b
> @@ -44,6 +51,13 @@
> #define PFUZE100_VGEN5VOL 0x70
> #define PFUZE100_VGEN6VOL 0x71
>
> +#define PFUZE100_SWxMODE_MASK 0xf
> +#define PFUZE100_SWxMODE_APS_APS 0x8
> +#define PFUZE100_SWxMODE_APS_OFF 0x4
> +
> +#define PFUZE100_VGENxLPWR BIT(6)
> +#define PFUZE100_VGENxSTBY BIT(5)
> +
> enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 };
>
> struct pfuze_regulator {
> @@ -492,6 +506,69 @@ static inline struct device_node *match_of_node(int
> index) } #endif
>
> +static struct pfuze_chip *syspm_pfuze_chip;
> +
> +static void pfuze_power_off_prepare(void)
> + dev_info(syspm_pfuze_chip->dev, "Configure standy mode for power
> +off");
Add 'if (syspm_pfuze_chip ->chip_id == PFUZE100))' here is easy for extend
Support on pfuze200/3000.. in the feature.
> +
> + /* Switch from default mode: APS/APS to APS/Off */
> + regmap_update_bits(syspm_pfuze_chip->regmap,
> PFUZE100_SW1ABMODE,
> + PFUZE100_SWxMODE_MASK,
> PFUZE100_SWxMODE_APS_OFF);
> + regmap_update_bits(syspm_pfuze_chip->regmap,
> PFUZE100_SW1CMODE,
> + PFUZE100_SWxMODE_MASK,
> PFUZE100_SWxMODE_APS_OFF);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW2MODE,
> + PFUZE100_SWxMODE_MASK,
> PFUZE100_SWxMODE_APS_OFF);
> + regmap_update_bits(syspm_pfuze_chip->regmap,
> PFUZE100_SW3AMODE,
> + PFUZE100_SWxMODE_MASK,
> PFUZE100_SWxMODE_APS_OFF);
> + regmap_update_bits(syspm_pfuze_chip->regmap,
> PFUZE100_SW3BMODE,
> + PFUZE100_SWxMODE_MASK,
> PFUZE100_SWxMODE_APS_OFF);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW4MODE,
> + PFUZE100_SWxMODE_MASK,
> PFUZE100_SWxMODE_APS_OFF);
> +
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN1VOL,
> + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
> + PFUZE100_VGENxSTBY);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN2VOL,
> + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
> + PFUZE100_VGENxSTBY);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN3VOL,
> + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
> + PFUZE100_VGENxSTBY);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN4VOL,
> + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
> + PFUZE100_VGENxSTBY);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN5VOL,
> + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
> + PFUZE100_VGENxSTBY);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN6VOL,
> + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
> + PFUZE100_VGENxSTBY);
> +}
> +
> +static int pfuze_power_off_prepare_init(struct pfuze_chip *pfuze_chip)
> +{
> + if (pfuze_chip->chip_id != PFUZE100) {
> + dev_warn(pfuze_chip->dev, "Requested pm_power_off_prepare
> handler for not supported chip\n");
> + return -ENODEV;
> + }
> +
> + if (pm_power_off_prepare) {
> + dev_warn(pfuze_chip->dev, "pm_power_off_prepare is already
> registered.\n");
> + return -EBUSY;
> + }
> +
> + if (syspm_pfuze_chip) {
> + dev_warn(pfuze_chip->dev, "syspm_pfuze_chip is already set.\n");
> + return -EBUSY;
> + }
> +
> + syspm_pfuze_chip = pfuze_chip;
> + pm_power_off_prepare = pfuze_power_off_prepare;
> +
> + return 0;
> +}
> +
> static int pfuze_identify(struct pfuze_chip *pfuze_chip) {
> unsigned int value;
> @@ -661,6 +738,20 @@ static int pfuze100_regulator_probe(struct i2c_client
> *client,
> }
> }
>
> + if (of_property_read_bool(client->dev.of_node,
> + "fsl,pmic-stby-poweroff"))
> + return pfuze_power_off_prepare_init(pfuze_chip);
> +
> + return 0;
> +}
> +
> +static int pfuze100_regulator_remove(struct i2c_client *client) {
> + if (syspm_pfuze_chip) {
> + syspm_pfuze_chip = NULL;
> + pm_power_off_prepare = NULL;
> + }
> +
> return 0;
> }
>
> @@ -671,6 +762,7 @@ static struct i2c_driver pfuze_driver = {
> .of_match_table = pfuze_dt_ids,
> },
> .probe = pfuze100_regulator_probe,
> + .remove = pfuze100_regulator_remove,
> };
> module_i2c_driver(pfuze_driver);
>
> --
> 2.18.0
