On 30.07.2018 16:49, Claudiu Beznea wrote:
Hi Codrin,
On 30.07.2018 14:40, Codrin Ciubotariu wrote:
From: Cyrille Pitchen <cyrille.pitc...@atmel.com>
This patch sets the pin muxing for the I2S controllers
Signed-off-by: Cyrille Pitchen <cyrille.pitc...@atmel.com>
[codrin.ciubota...@microchip.com: added pin muxing for the second
controller]
Signed-off-by: Codrin Ciubotariu <codrin.ciubota...@microchip.com>
---
Changes in v6:
- none;
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 28 +++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index fcc85d70f36e..95cbec0f8790 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -281,6 +281,11 @@
status = "okay";
};
+ i2s0: i2s@f8050000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s0_default>;
The approach with the disabled controllers in board DTS files (for our
boards) is to use the: status = "disabled" and if there are pin conflicts
with other controllers to put a mark in there, something like:
status = "disabled"; /* Conflict with X */
I'm seeing that i2s1 is in conflict with sdmmc1 and spi0.
Ok, I will disable them and add the pin conflicts in the next version.
Thank you for your review.
Best regards,
Codrin
