Fortier,Vincent [Montreal] wrote:
Here is the output of the dmesg with now the appropriate order:
[EMAIL PROTECTED] /etc]# dmesg | grep -i eth
[ 120.685696] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2
v1.5.8.1 (May 7, 2007)
[ 120.703846] eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X
64-bit 133MHz found at mem f8000000, IRQ 17, node addr 0019b9c8eedc
[ 120.735350] eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X
64-bit 133MHz found at mem f4000000, IRQ 16, node addr 0019b9c8eede
[ 120.921403] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network
Connection
[ 121.069025] e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network
Connection
[ 267.720475] bnx2: eth0: using MSI
[ 270.832235] bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive
& transmit flow control ON
But still, there is a problem with the second Broadcom port (eth1):
[EMAIL PROTECTED] /etc]# mii-tool
eth0: negotiated 100baseTx-FD flow-control, link ok
SIOCGMIIPHY on 'eth1' failed: Resource temporarily unavailable
eth2: negotiated 100baseTx-FD flow-control, link ok
eth3: negotiated 100baseTx-FD flow-control, link ok
I don't get it?
Help appreciated.
Is that interface down? mii-tool probably doesn't work in that case..
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from [EMAIL PROTECTED]
Home Page: http://www.roberthancock.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
