Hi Florian, Thank you for the patch.
Please check the patch, which is in linux-next already: https://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git/commit/?h=for-next&id=8cb21086cc6359c6d4f003a788050308afb211ad It seems to have added the support you want. Best regards, Jacek Anaszewski On 07/30/2018 11:11 AM, Florian Eckert wrote: > This driver should also get loaded if this is a APU3 from PC Engines. > It has the same pin layout for leds. > > Signed-off-by: Florian Eckert <f...@dev.tdt.de> > --- > drivers/leds/leds-apu.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/leds/leds-apu.c b/drivers/leds/leds-apu.c > index 8c93d68964c7..1ed1c5a5dc77 100644 > --- a/drivers/leds/leds-apu.c > +++ b/drivers/leds/leds-apu.c > @@ -134,6 +134,14 @@ static const struct dmi_system_id apu_led_dmi_table[] > __initconst = { > DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu2") > } > }, > + /* PC Engines APU3 with "Legancy" bios >= 4.0.7 */ > + { > + .ident = "apu3", > + .matches = { > + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), > + DMI_MATCH(DMI_BOARD_NAME, "APU3") > + } > + }, > {} > }; > MODULE_DEVICE_TABLE(dmi, apu_led_dmi_table); > @@ -229,6 +237,7 @@ static int __init apu_led_probe(struct platform_device > *pdev) > apu_led->num_led_instances = ARRAY_SIZE(apu1_led_profile); > apu_led->iosize = APU1_IOSIZE; > } else if (dmi_match(DMI_BOARD_NAME, "APU2") || > + dmi_match(DMI_BOARD_NAME, "APU3") || > dmi_match(DMI_BOARD_NAME, "apu2") || > dmi_match(DMI_BOARD_NAME, "PC Engines apu2")) { > apu_led->profile = apu2_led_profile; > @@ -258,6 +267,7 @@ static int __init apu_led_init(void) > } > if (!(dmi_match(DMI_PRODUCT_NAME, "APU") || > dmi_match(DMI_PRODUCT_NAME, "APU2") || > + dmi_match(DMI_PRODUCT_NAME, "APU3") || > dmi_match(DMI_PRODUCT_NAME, "apu2") || > dmi_match(DMI_PRODUCT_NAME, "PC Engines apu2"))) { > pr_err("Unknown PC Engines board: %s\n", >
