From: Todd Poynor <toddpoy...@google.com>
Fix multi-line alignment formatting to look like:
int ret = long_function_name(device, VARIABLE1, VARIABLE2,
VARIABLE3, VARIABLE4);
Signed-off-by: Todd Poynor <toddpoy...@google.com>
---
drivers/staging/gasket/gasket_interrupt.c | 73 +++++++++++------------
drivers/staging/gasket/gasket_interrupt.h | 19 +++---
2 files changed, 43 insertions(+), 49 deletions(-)
diff --git a/drivers/staging/gasket/gasket_interrupt.c
b/drivers/staging/gasket/gasket_interrupt.c
index 3079b59b122b..09c3d0747af6 100644
--- a/drivers/staging/gasket/gasket_interrupt.c
+++ b/drivers/staging/gasket/gasket_interrupt.c
@@ -144,11 +144,10 @@ static void gasket_interrupt_setup(struct gasket_dev
*gasket_dev)
}
mask = ~(0xFFFF << pack_shift);
- value = gasket_dev_read_64(
- gasket_dev,
- interrupt_data->interrupt_bar_index,
- interrupt_data->interrupts[i].reg) &
- mask;
+ value = gasket_dev_read_64(gasket_dev,
+
interrupt_data->interrupt_bar_index,
+
interrupt_data->interrupts[i].reg);
+ value &= mask;
value |= interrupt_data->interrupts[i].index
<< pack_shift;
}
@@ -187,8 +186,8 @@ static irqreturn_t gasket_msix_interrupt_handler(int irq,
void *dev_id)
return IRQ_HANDLED;
}
-static int gasket_interrupt_msix_init(
- struct gasket_interrupt_data *interrupt_data)
+static int
+gasket_interrupt_msix_init(struct gasket_interrupt_data *interrupt_data)
{
int ret = 1;
int i;
@@ -210,10 +209,9 @@ static int gasket_interrupt_msix_init(
interrupt_data->msix_configured = 1;
for (i = 0; i < interrupt_data->num_interrupts; i++) {
- ret = request_irq(
- interrupt_data->msix_entries[i].vector,
- gasket_msix_interrupt_handler, 0, interrupt_data->name,
- interrupt_data);
+ ret = request_irq(interrupt_data->msix_entries[i].vector,
+ gasket_msix_interrupt_handler, 0,
+ interrupt_data->name, interrupt_data);
if (ret) {
dev_err(&interrupt_data->pci_dev->dev,
@@ -250,25 +248,23 @@ static void force_msix_interrupt_unmasking(struct
gasket_dev *gasket_dev)
ulong location = APEX_BAR2_REG_KERNEL_HIB_MSIX_TABLE +
MSIX_MASK_BIT_OFFSET + i * MSIX_VECTOR_SIZE;
u32 mask =
- gasket_dev_read_32(
- gasket_dev,
- gasket_dev->interrupt_data->interrupt_bar_index,
- location);
+ gasket_dev_read_32(gasket_dev,
+
gasket_dev->interrupt_data->interrupt_bar_index,
+ location);
if (!(mask & 1))
continue;
/* Unmask the msix vector (clear 32 bits) */
- gasket_dev_write_32(
- gasket_dev, 0,
- gasket_dev->interrupt_data->interrupt_bar_index,
- location);
+ gasket_dev_write_32(gasket_dev, 0,
+
gasket_dev->interrupt_data->interrupt_bar_index,
+ location);
}
#undef MSIX_VECTOR_SIZE
#undef MSIX_MASK_BIT_OFFSET
#undef APEX_BAR2_REG_KERNEL_HIB_MSIX_TABLE
}
-static ssize_t interrupt_sysfs_show(
- struct device *device, struct device_attribute *attr, char *buf)
+static ssize_t interrupt_sysfs_show(struct device *device,
+ struct device_attribute *attr, char *buf)
{
int i, ret;
ssize_t written = 0, total_written = 0;
@@ -318,22 +314,22 @@ static ssize_t interrupt_sysfs_show(
}
static struct gasket_sysfs_attribute interrupt_sysfs_attrs[] = {
- GASKET_SYSFS_RO(
- interrupt_counts, interrupt_sysfs_show, ATTR_INTERRUPT_COUNTS),
+ GASKET_SYSFS_RO(interrupt_counts, interrupt_sysfs_show,
+ ATTR_INTERRUPT_COUNTS),
GASKET_END_OF_ATTR_ARRAY,
};
-int gasket_interrupt_init(
- struct gasket_dev *gasket_dev, const char *name, int type,
- const struct gasket_interrupt_desc *interrupts,
- int num_interrupts, int pack_width, int bar_index,
- const struct gasket_wire_interrupt_offsets *wire_int_offsets)
+int gasket_interrupt_init(struct gasket_dev *gasket_dev, const char *name,
+ int type,
+ const struct gasket_interrupt_desc *interrupts,
+ int num_interrupts, int pack_width, int bar_index,
+ const struct gasket_wire_interrupt_offsets
*wire_int_offsets)
{
int ret;
struct gasket_interrupt_data *interrupt_data;
- interrupt_data = kzalloc(
- sizeof(struct gasket_interrupt_data), GFP_KERNEL);
+ interrupt_data = kzalloc(sizeof(struct gasket_interrupt_data),
+ GFP_KERNEL);
if (!interrupt_data)
return -ENOMEM;
gasket_dev->interrupt_data = interrupt_data;
@@ -402,14 +398,14 @@ int gasket_interrupt_init(
}
gasket_interrupt_setup(gasket_dev);
- gasket_sysfs_create_entries(
- gasket_dev->dev_info.device, interrupt_sysfs_attrs);
+ gasket_sysfs_create_entries(gasket_dev->dev_info.device,
+ interrupt_sysfs_attrs);
return 0;
}
-static void gasket_interrupt_msix_cleanup(
- struct gasket_interrupt_data *interrupt_data)
+static void
+gasket_interrupt_msix_cleanup(struct gasket_interrupt_data *interrupt_data)
{
int i;
@@ -528,9 +524,8 @@ int gasket_interrupt_system_status(struct gasket_dev
*gasket_dev)
return GASKET_STATUS_ALIVE;
}
-int gasket_interrupt_set_eventfd(
- struct gasket_interrupt_data *interrupt_data, int interrupt,
- int event_fd)
+int gasket_interrupt_set_eventfd(struct gasket_interrupt_data *interrupt_data,
+ int interrupt, int event_fd)
{
struct eventfd_ctx *ctx = eventfd_ctx_fdget(event_fd);
@@ -544,8 +539,8 @@ int gasket_interrupt_set_eventfd(
return 0;
}
-int gasket_interrupt_clear_eventfd(
- struct gasket_interrupt_data *interrupt_data, int interrupt)
+int gasket_interrupt_clear_eventfd(struct gasket_interrupt_data
*interrupt_data,
+ int interrupt)
{
if (interrupt < 0 || interrupt >= interrupt_data->num_interrupts)
return -EINVAL;
diff --git a/drivers/staging/gasket/gasket_interrupt.h
b/drivers/staging/gasket/gasket_interrupt.h
index 805fee64569f..835af439e96a 100644
--- a/drivers/staging/gasket/gasket_interrupt.h
+++ b/drivers/staging/gasket/gasket_interrupt.h
@@ -43,11 +43,11 @@ struct gasket_interrupt_data;
* are not possible to set up, but is otherwise OK; that device will report
* status LAMED.)
*/
-int gasket_interrupt_init(
- struct gasket_dev *gasket_dev, const char *name, int type,
- const struct gasket_interrupt_desc *interrupts,
- int num_interrupts, int pack_width, int bar_index,
- const struct gasket_wire_interrupt_offsets *wire_int_offsets);
+int gasket_interrupt_init(struct gasket_dev *gasket_dev, const char *name,
+ int type,
+ const struct gasket_interrupt_desc *interrupts,
+ int num_interrupts, int pack_width, int bar_index,
+ const struct gasket_wire_interrupt_offsets
*wire_int_offsets);
/*
* Clean up a device's interrupt structure.
@@ -87,9 +87,8 @@ int gasket_interrupt_reset_counts(struct gasket_dev
*gasket_dev);
*
* Returns 0 on success, a negative error code otherwise.
*/
-int gasket_interrupt_set_eventfd(
- struct gasket_interrupt_data *interrupt_data, int interrupt,
- int event_fd);
+int gasket_interrupt_set_eventfd(struct gasket_interrupt_data *interrupt_data,
+ int interrupt, int event_fd);
/*
* Removes an interrupt-eventfd association.
@@ -98,8 +97,8 @@ int gasket_interrupt_set_eventfd(
*
* Removes any eventfd associated with the specified interrupt, if any.
*/
-int gasket_interrupt_clear_eventfd(
- struct gasket_interrupt_data *interrupt_data, int interrupt);
+int gasket_interrupt_clear_eventfd(struct gasket_interrupt_data
*interrupt_data,
+ int interrupt);
/*
* The below functions exist for backwards compatibility.
--
2.18.0.345.g5c9ce644c3-goog
