On Tue, 7 Aug 2018 11:20:28 -0600 Rob Herring <r...@kernel.org> wrote:
> On Fri, Aug 03, 2018 at 10:51:23PM +0100, Jonathan Cameron wrote: > > On Thu, 2 Aug 2018 20:18:57 -0400 > > Brian Masney <masn...@onstation.org> wrote: > > > > > This patch adds device tree bindings to the tsl2772 driver for the > > > regulator framework. > > > > > > Signed-off-by: Brian Masney <masn...@onstation.org> > > I suspect Rob will tell you this should really have been in the same > > patch as the earlier bindings. There is no need for us to wait > > for the driver support as the binding describes what is there, not > > what we do with it. > > Yep. > > > > > Otherwise it's fine and if nothing else comes up I can merge them ;) I merged them. Jonathan > > > > Jonathan > > > > > --- > > > Documentation/devicetree/bindings/iio/light/tsl2772.txt | 4 ++++ > > > 1 file changed, 4 insertions(+) > > > > > > diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt > > > b/Documentation/devicetree/bindings/iio/light/tsl2772.txt > > > index 6f33169344f2..4e7d98627cbf 100644 > > > --- a/Documentation/devicetree/bindings/iio/light/tsl2772.txt > > > +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.txt > > > @@ -21,6 +21,8 @@ Optional properties: > > > are the only valid values. > > > - led-max-microamp - current for the proximity LED. Must be 100000, > > > 50000, > > > 25000, or 13000. > > > + - vdd-supply: phandle to the regulator that provides power to the > > > sensor. > > > + - vddio-supply: phandle to the regulator that provides power to the > > > bus. > > > - interrupts: the sole interrupt generated by the device > > > > > > Refer to interrupt-controller/interrupts.txt for generic interrupt > > > client > > > @@ -32,6 +34,8 @@ tsl2772@39 { > > > compatible = "amstaos,tsl2772"; > > > reg = <0x39>; > > > interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; > > > + vdd-supply = <&pm8941_l17>; > > > + vddio-supply = <&pm8941_lvs1>; > > > amstaos,proximity-diodes = <0>; > > > led-max-microamp = <100000>; > > > }; > >