In the example for the pwm-vibrator bindings, pwm8 is the direction pin,
and pwm9 is the enable pin. The pwm-names on the vibrator node has these
two values swapped. This patch corrects the values for pwm-names.
Signed-off-by: Brian Masney <masn...@onstation.org>
---
arch/arm/boot/dts/omap4-droid4-xt894.dts is actual implementation for
the example and it is correct.
Documentation/devicetree/bindings/input/pwm-vibrator.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt
b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
index 09145d18491d..2731cbb7e8d7 100644
--- a/Documentation/devicetree/bindings/input/pwm-vibrator.txt
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
@@ -60,7 +60,7 @@ Example from Motorola Droid 4:
compatible = "pwm-vibrator";
pwms = <&pwm8 0 1000000000 0>,
<&pwm9 0 1000000000 0>;
- pwm-names = "enable", "direction";
+ pwm-names = "direction", "enable";
direction-duty-cycle-ns = <1000000000>;
};
};
--
2.17.1
