On 10/08/18 21:08, Aapo Vienamo wrote:
> Add SDHCI_QUIRK2_TUNE_SKIP_XFERRMODE_REG_PROG to skip programming the
> SDHCI_TRANSFER_MODE in sdhci_set_transfer_mode() if tuning command is
> being sent.
> 
> On Tegra210 and Tegra186 the tuning sequence hangs if the SDHCI
> transfer mode register is touched.
> 
> Signed-off-by: Aapo Vienamo <[email protected]>
> ---
>  drivers/mmc/host/sdhci.c | 6 ++++++
>  drivers/mmc/host/sdhci.h | 2 ++
>  2 files changed, 8 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index a7b5602..04dc443 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1028,6 +1028,12 @@ static void sdhci_set_transfer_mode(struct sdhci_host 
> *host,
>  
>       if (data == NULL) {
>               if (host->quirks2 &
> +                     SDHCI_QUIRK2_TUNE_SKIP_XFERMODE_REG_PROG &&
> +                             (cmd->opcode == MMC_SEND_TUNING_BLOCK ||
> +                              cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)) {
> +                     return;
> +             }

Rather than introduce a quirk, can't we just dodge the unnecessary write e.g.

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 1b3fbd9bd5c5..68af6a67e397 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1033,10 +1033,19 @@ static void sdhci_set_transfer_mode(struct sdhci_host 
*host,
                        if (cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)
                                sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
                } else {
-               /* clear Auto CMD settings for no data CMDs */
+                       u16 orig;
+
+                       /* clear Auto CMD settings for no data CMDs */
                        mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
-                       sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
-                               SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
+                       orig = mode;
+                       mode &= ~(SDHCI_TRNS_AUTO_CMD12 | 
SDHCI_TRNS_AUTO_CMD23);
+                       /*
+                        * Do not write transfer mode unnecessarily because it
+                        * can upset some host controllers (e.g. sdhci-tregra)
+                        * during tuning.
+                        */
+                       if (mode != orig)
+                               sdhci_writew(host, new_mode, 
SDHCI_TRANSFER_MODE);
                }
                return;
        }


Alternatively 

> +             if (host->quirks2 &
>                       SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
>                       sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
>               } else {
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 23966f8..0a99008 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -450,6 +450,8 @@ struct sdhci_host {
>   * obtainable timeout.
>   */
>  #define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT                      (1<<17)
> +/* Don't clear the SDHCI_TRANSFER_MODE register on tuning commands */
> +#define SDHCI_QUIRK2_TUNE_SKIP_XFERMODE_REG_PROG     (1<<18)
>  
>       int irq;                /* Device IRQ */
>       void __iomem *ioaddr;   /* Mapped address */
> 

Reply via email to