The atmel hlcdc controller has nothing to do with these pins, so move
them to where they belong.
Signed-off-by: Peter Rosin <p...@axentia.se>
---
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index fbc796125c56..2eb0f947ab86 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -34,7 +34,7 @@
AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
- pinctrl_lcd_prlud0: lcd_prlud0 {
+ pinctrl_lvds_prlud0: lvds_prlud0 {
atmel,pins =
<AT91_PIOA 21
AT91_PERIPH_GPIO
@@ -42,7 +42,7 @@
AT91_PINCTRL_OUTPUT_VAL(0))>;
};
- pinctrl_lcd_hipow0: lcd_hipow0 {
+ pinctrl_lvds_hipow0: lvds_hipow0 {
atmel,pins =
<AT91_PIOA 23
AT91_PERIPH_GPIO
@@ -119,6 +119,9 @@
lvds-encoder {
compatible = "ti,ds90c185", "lvds-encoder";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -197,10 +200,7 @@
hlcdc-display-controller {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_base
- &pinctrl_lcd_rgb565
- &pinctrl_lcd_prlud0
- &pinctrl_lcd_hipow0>;
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
port@0 {
hlcdc_output: endpoint {
--
2.11.0
