From: Rajesh Bhagat <rajesh.bha...@freescale.com>
Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustent is required or
not
Signed-off-by: Rajesh Bhagat <rajesh.bha...@nxp.com>
Signed-off-by: Ran Wang <ran.wan...@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index a830a2e..a3c5165 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -610,6 +610,7 @@
snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
dma-coherent;
+ configure-gfladj;
};
usb1: usb3@3000000 {
@@ -623,6 +624,7 @@
snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
dma-coherent;
+ configure-gfladj;
};
usb2: usb3@3100000 {
@@ -636,6 +638,7 @@
snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
dma-coherent;
+ configure-gfladj;
};
sata: sata@3200000 {
--
1.7.1
