Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
upstream-linus
to receive the following updates:
drivers/ata/libata-core.c | 56 +++++++++++++++-----------------------------
drivers/ata/libata-eh.c | 7 +----
drivers/ata/libata-scsi.c | 20 ++++++---------
drivers/ata/pata_hpt37x.c | 4 +-
drivers/ata/pata_it821x.c | 2 +-
include/linux/libata.h | 9 ++-----
6 files changed, 35 insertions(+), 63 deletions(-)
Alan Cox (1):
HPT374 is UDMA100 not UDMA133
Randy Dunlap (1):
pata_it821x: fix section mismatch warning
Tejun Heo (9):
libata: kill the infamous abnormal status message
libata: kill non-sense warning message
libata: be less verbose about hpa
libata: remove unused variable from ata_eh_reset()
libata: fix ata_dev_disable()
libata: fix infinite EH waiting bug
libata: call ata_check_atapi_dma() with qc better prepared
libata: use PIO for non-16 byte aligned ATAPI commands
libata: kill ATA_HORKAGE_DMA_RW_ONLY
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index adfae9d..bfc59a1 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -600,8 +600,9 @@ static const char *sata_spd_string(unsigned int spd)
void ata_dev_disable(struct ata_device *dev)
{
- if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) {
- ata_dev_printk(dev, KERN_WARNING, "disabled\n");
+ if (ata_dev_enabled(dev)) {
+ if (ata_msg_drv(dev->ap))
+ ata_dev_printk(dev, KERN_WARNING, "disabled\n");
ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 |
ATA_DNXFER_QUIET);
dev->class++;
@@ -983,11 +984,6 @@ static u64 ata_hpa_resize(struct ata_device *dev)
else
hpa_sectors = ata_read_native_max_address(dev);
- /* if no hpa, both should be equal */
- ata_dev_printk(dev, KERN_INFO, "%s 1: sectors = %lld, "
- "hpa_sectors = %lld\n",
- __FUNCTION__, (long long)sectors, (long long)hpa_sectors);
-
if (hpa_sectors > sectors) {
ata_dev_printk(dev, KERN_INFO,
"Host Protected Area detected:\n"
@@ -1009,7 +1005,11 @@ static u64 ata_hpa_resize(struct ata_device *dev)
return hpa_sectors;
}
}
- }
+ } else if (hpa_sectors < sectors)
+ ata_dev_printk(dev, KERN_WARNING, "%s 1: hpa sectors (%lld) "
+ "is smaller than sectors (%lld)\n", __FUNCTION__,
+ (long long)hpa_sectors, (long long)sectors);
+
return sectors;
}
@@ -2046,10 +2046,6 @@ int ata_dev_configure(struct ata_device *dev)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
dev->max_sectors);
- /* limit ATAPI DMA to R/W commands only */
- if (ata_device_blacklisted(dev) & ATA_HORKAGE_DMA_RW_ONLY)
- dev->horkage |= ATA_HORKAGE_DMA_RW_ONLY;
-
if (ap->ops->dev_config)
ap->ops->dev_config(dev);
@@ -3780,8 +3776,7 @@ static const struct ata_blacklist_entry
ata_device_blacklist [] = {
{ "IOMEGA ZIP 250 ATAPI", NULL, ATA_HORKAGE_NODMA }, /*
temporary fix */
/* Weird ATAPI devices */
- { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 |
- ATA_HORKAGE_DMA_RW_ONLY },
+ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
/* Devices we expect to fail diagnostics */
@@ -4109,6 +4104,7 @@ static void ata_fill_sg(struct ata_queued_cmd *qc)
if (idx)
ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
}
+
/**
* ata_check_atapi_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
@@ -4126,33 +4122,19 @@ static void ata_fill_sg(struct ata_queued_cmd *qc)
int ata_check_atapi_dma(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- int rc = 0; /* Assume ATAPI DMA is OK by default */
-
- /* some drives can only do ATAPI DMA on read/write */
- if (unlikely(qc->dev->horkage & ATA_HORKAGE_DMA_RW_ONLY)) {
- struct scsi_cmnd *cmd = qc->scsicmd;
- u8 *scsicmd = cmd->cmnd;
-
- switch (scsicmd[0]) {
- case READ_10:
- case WRITE_10:
- case READ_12:
- case WRITE_12:
- case READ_6:
- case WRITE_6:
- /* atapi dma maybe ok */
- break;
- default:
- /* turn off atapi dma */
- return 1;
- }
- }
+
+ /* Don't allow DMA if it isn't multiple of 16 bytes. Quite a
+ * few ATAPI devices choke on such DMA requests.
+ */
+ if (unlikely(qc->nbytes & 15))
+ return 1;
if (ap->ops->check_atapi_dma)
- rc = ap->ops->check_atapi_dma(qc);
+ return ap->ops->check_atapi_dma(qc);
- return rc;
+ return 0;
}
+
/**
* ata_qc_prep - Prepare taskfile for submission
* @qc: Metadata associated with taskfile to be prepared
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index d807098..f7582c9 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -336,6 +336,7 @@ void ata_scsi_error(struct Scsi_Host *host)
}
ata_port_printk(ap, KERN_ERR, "EH pending after %d "
"tries, giving up\n",
ATA_EH_MAX_REPEAT);
+ ap->pflags &= ~ATA_PFLAG_EH_PENDING;
}
/* this run is complete, make sure EH info is clear */
@@ -1616,7 +1617,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
unsigned long deadline;
unsigned int action;
ata_reset_fn_t reset;
- int i, did_followup_srst, rc;
+ int i, rc;
/* about to reset */
ata_eh_about_to_do(ap, NULL, ehc->i.action & ATA_EH_RESET_MASK);
@@ -1665,8 +1666,6 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
/* did prereset() screw up? if so, fix up to avoid oopsing */
if (!reset) {
- ata_port_printk(ap, KERN_ERR, "BUG: prereset() requested "
- "invalid reset type\n");
if (softreset)
reset = softreset;
else
@@ -1689,11 +1688,9 @@ static int ata_eh_reset(struct ata_port *ap, int
classify,
rc = ata_do_reset(ap, reset, classes, deadline);
- did_followup_srst = 0;
if (reset == hardreset &&
ata_eh_followup_srst_needed(rc, classify, classes)) {
/* okay, let's do follow-up softreset */
- did_followup_srst = 1;
reset = softreset;
if (!reset) {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index c228df2..4ddf00c 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2384,11 +2384,6 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
int using_pio = (dev->flags & ATA_DFLAG_PIO);
int nodata = (scmd->sc_data_direction == DMA_NONE);
- if (!using_pio)
- /* Check whether ATAPI DMA is safe */
- if (ata_check_atapi_dma(qc))
- using_pio = 1;
-
memset(qc->cdb, 0, dev->cdb_len);
memcpy(qc->cdb, scmd->cmnd, scmd->cmd_len);
@@ -2401,19 +2396,22 @@ static unsigned int atapi_xlat(struct ata_queued_cmd
*qc)
}
qc->tf.command = ATA_CMD_PACKET;
+ qc->nbytes = scmd->request_bufflen;
+
+ /* check whether ATAPI DMA is safe */
+ if (!using_pio && ata_check_atapi_dma(qc))
+ using_pio = 1;
- /* no data, or PIO data xfer */
if (using_pio || nodata) {
+ /* no data, or PIO data xfer */
if (nodata)
qc->tf.protocol = ATA_PROT_ATAPI_NODATA;
else
qc->tf.protocol = ATA_PROT_ATAPI;
qc->tf.lbam = (8 * 1024) & 0xff;
qc->tf.lbah = (8 * 1024) >> 8;
- }
-
- /* DMA data xfer */
- else {
+ } else {
+ /* DMA data xfer */
qc->tf.protocol = ATA_PROT_ATAPI_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
@@ -2422,8 +2420,6 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
qc->tf.feature |= ATAPI_DMADIR;
}
- qc->nbytes = scmd->request_bufflen;
-
return 0;
}
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 6446735..a8c0cbe 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -931,13 +931,13 @@ static int hpt37x_init_one(struct pci_dev *dev, const
struct pci_device_id *id)
.udma_mask = 0x7f,
.port_ops = &hpt372_port_ops
};
- /* HPT374 - UDMA133 */
+ /* HPT374 - UDMA100 */
static const struct ata_port_info info_hpt374 = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
- .udma_mask = 0x7f,
+ .udma_mask = 0x3f,
.port_ops = &hpt374_port_ops
};
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index dab4e7c..12c6e08 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -690,7 +690,7 @@ static struct ata_port_operations it821x_passthru_port_ops
= {
.port_start = it821x_port_start,
};
-static void __devinit it821x_disable_raid(struct pci_dev *pdev)
+static void it821x_disable_raid(struct pci_dev *pdev)
{
/* Reset local CPU, and set BIOS not ready */
pci_write_config_byte(pdev, 0x5E, 0x01);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 745c4f9..620da7b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -298,7 +298,6 @@ enum {
ATA_HORKAGE_NODMA = (1 << 1), /* DMA problems */
ATA_HORKAGE_NONCQ = (1 << 2), /* Don't use NCQ */
ATA_HORKAGE_MAX_SEC_128 = (1 << 3), /* Limit max sects to 128 */
- ATA_HORKAGE_DMA_RW_ONLY = (1 << 4), /* ATAPI DMA for RW only */
};
enum hsm_task_states {
@@ -1088,11 +1087,9 @@ static inline u8 ata_wait_idle(struct ata_port *ap)
{
u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
- if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ))) {
- if (ata_msg_warn(ap))
- printk(KERN_WARNING "ATA: abnormal status 0x%X on port
0x%p\n",
- status, ap->ioaddr.status_addr);
- }
+ if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ)))
+ DPRINTK("ATA: abnormal status 0x%X on port 0x%p\n",
+ status, ap->ioaddr.status_addr);
return status;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
