Add the explanation and a sample of RapidIO DTS sector to the document of 
booting-without-of.txt file.

Signed-off-by: Zhang Wei <[EMAIL PROTECTED]>
---
 Documentation/powerpc/booting-without-of.txt |   34 ++++++++++++++++++++++++++
 1 files changed, 34 insertions(+), 0 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt 
b/Documentation/powerpc/booting-without-of.txt
index b49ce16..98692ca 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1727,6 +1727,40 @@ platforms are moved over to use the 
flattened-device-tree model.
                partition-names = "fs\0firmware";
        };
 
+   k) RapidIO
+
+   Required properties:
+
+    - compatible : Should be "fsl,rapidio-delta" for Freescale
+      PowerPC RapidIO controller.
+    - #address-cells : Address representation for "rapidio" devices.
+      This field represents the number of cells needed to represent
+      the RapidIO address of the registers.  For supporting more than
+      32-bits RapidIO address, this field should be <2>.
+      See 1) above for more details on defining #address-cells.
+    - reg : Offset and length of the register set for the device
+    - ranges : Should be defined as specified in 1) to describe the
+      translation of addresses for memory mapped RapidIO memory
+      space.
+    - interrupts : binding interrupts for this device sector,
+      please follow below orders:
+      <err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
+      msg2_tx_irq msg2_rx_irq ... msgN_tx_irq msgN_rx_irq>.
+
+  Example:
+
+       [EMAIL PROTECTED]
+               compatible = "fsl,rapidio-delta";
+               #address-cells = <2>;
+               #size-cells = <2>;
+               reg = <c0000 20000>;
+               ranges = <0 0 c0000000 20000000>;
+               interrupt-parent = <&mpic>;
+               /* err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
+                                                     msg2_tx_irq msg2_rx_irq */
+               interrupts = <30 2 31 2 32 2 35 2 36 2 37 2 38 2>;
+       };
+
    More devices will be defined as this spec matures.
 
 VII - Specifying interrupt information for devices
-- 
1.5.1

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to