On Tue, Aug 28, 2018 at 05:42:26PM -0700, Venkata Narendra Kumar Gutta wrote:
> From: Channagoud Kadabi <ckad...@codeaurora.org>
>
> Add error reporting driver for Single Bit Errors (SBEs) and Double Bit
> Errors (DBEs). As of now, this driver supports error reporting for
> Last Level Cache Controller (LLCC) of Tag RAM and Data RAM. Interrupts
> are triggered when the errors happen in the cache, the driver handles
> those interrupts and dumps the syndrome registers.
>
> Signed-off-by: Channagoud Kadabi <ckad...@codeaurora.org>
> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgu...@codeaurora.org>
> Co-developed-by: Venkata Narendra Kumar Gutta <vnkgu...@codeaurora.org>
> ---
> MAINTAINERS | 8 +
> drivers/edac/Kconfig | 22 ++
> drivers/edac/Makefile | 1 +
> drivers/edac/qcom_edac.c | 421
> +++++++++++++++++++++++++++++++++++++
> include/linux/soc/qcom/llcc-qcom.h | 24 +++
> 5 files changed, 476 insertions(+)
> create mode 100644 drivers/edac/qcom_edac.c
We'd also need an agreement who picks up the whole pile?
Those guys:
Andy Gross <andy.gr...@linaro.org> (maintainer:ARM/QUALCOMM SUPPORT)
David Brown <david.br...@linaro.org> (maintainer:ARM/QUALCOMM SUPPORT)
and I ACK the EDAC driver or I do and they ACK the soc pieces.
I have a hunch the prior would be easier...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0a23427..0bff713 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5227,6 +5227,14 @@ L: linux-e...@vger.kernel.org
> S: Maintained
> F: drivers/edac/ti_edac.c
>
> +EDAC-QUALCOMM
> +M: Channagoud Kadabi <ckad...@codeaurora.org>
> +M: Venkata Narendra Kumar Gutta <vnkgu...@codeaurora.org>
> +L: linux-arm-...@vger.kernel.org
> +L: linux-e...@vger.kernel.org
> +S: Maintained
> +F: drivers/edac/qcom_edac.c
> +
> EDIROL UA-101/UA-1000 DRIVER
> M: Clemens Ladisch <clem...@ladisch.de>
> L: alsa-de...@alsa-project.org (moderated for non-subscribers)
> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index 57304b2..df58957 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -460,4 +460,26 @@ config EDAC_TI
> Support for error detection and correction on the
> TI SoCs.
>
> +config EDAC_QCOM
> + tristate "QCOM EDAC Controller"
> + depends on EDAC
> + help
> + Support for error detection and correction on the
> + QCOM SoCs.
> +
> + This driver reports Single Bit Errors (SBEs) and Double Bit Errors
> (DBEs).
> + As of now, it supports error reporting for Last Level Cache
> Controller (LLCC)
> + of Tag RAM and Data RAM.
> +
> +config EDAC_QCOM_LLCC
> + tristate "QCOM EDAC Controller for LLCC Cache"
> + depends on EDAC_QCOM && QCOM_LLCC
This is just silly: two EDAC config options for a single driver and this
second one only does:
#ifdef EDAC_QCOM_LLCC
{ .compatible = "qcom,llcc-edac" },
#endif
What for?!
You do this:
config EDAC_QCOM
depends on <architecture which this driver runs on> && QCOM_LLCC
and that's it.
...
> +/* Dump Syndrome registers data for Tag RAM, Data RAM bit errors*/
> +static int
> +dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type)
> +{
> + struct llcc_edac_reg_data reg_data = edac_reg_data[err_type];
> + int err_cnt, err_ways, ret, i;
> + u32 synd_reg, synd_val;
> +
> + for (i = 0; i < reg_data.reg_cnt; i++) {
> + synd_reg = reg_data.synd_reg + (i * 4);
> + ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg,
> + &synd_val);
> + if (ret)
> + goto clear;
<----- newline here.
> + edac_printk(KERN_CRIT, EDAC_LLCC, "%s: ECC_SYN%d: 0x%8x\n",
> + reg_data.name, i, synd_val);
> + }
> +
> + ret = regmap_read(drv->regmap,
> + drv->offsets[bank] + reg_data.count_status_reg,
> + &err_cnt);
> + if (ret)
> + goto clear;
> +
> + err_cnt &= reg_data.count_mask;
> + err_cnt >>= reg_data.count_shift;
> + edac_printk(KERN_CRIT, EDAC_LLCC, "%s: error count: 0x%4x\n",
> + reg_data.name, err_cnt);
> +
> + ret = regmap_read(drv->regmap,
> + drv->offsets[bank] + reg_data.ways_status_reg,
> + &err_ways);
> + if (ret)
> + goto clear;
> +
> + err_ways &= reg_data.ways_mask;
> + err_ways >>= reg_data.ways_shift;
> +
> + edac_printk(KERN_CRIT, EDAC_LLCC, "%s: error ways: 0x%4x\n",
> + reg_data.name, err_ways);
> +
> +clear:
> + return qcom_llcc_clear_error_status(err_type, drv);
> +}
> +
> +static int
> +dump_syn_reg(struct edac_device_ctl_info *edev_ctl, int err_type, u32 bank)
> +{
> + struct llcc_drv_data *drv = edev_ctl->pvt_info;
> + int ret;
> +
> + ret = dump_syn_reg_values(drv, bank, err_type);
> + if (ret)
> + return ret;
> +
> + switch (err_type) {
> + case LLCC_DRAM_CE:
> + edac_device_handle_ce(edev_ctl, 0, bank,
> + "LLCC Data RAM correctable Error");
> + break;
> + case LLCC_DRAM_UE:
> + edac_device_handle_ue(edev_ctl, 0, bank,
> + "LLCC Data RAM uncorrectable Error");
> + break;
> + case LLCC_TRAM_CE:
> + edac_device_handle_ce(edev_ctl, 0, bank,
> + "LLCC Tag RAM correctable Error");
> + break;
> + case LLCC_TRAM_UE:
> + edac_device_handle_ue(edev_ctl, 0, bank,
> + "LLCC Tag RAM uncorrectable Error");
> + break;
> + default:
> + ret = -EINVAL;
> + edac_printk(KERN_CRIT, EDAC_LLCC, "Unexpected error type: %d\n",
> + err_type);
> + }
> +
> + return ret;
> +}
> +
> +static irqreturn_t
> +llcc_ecc_irq_handler(int irq, void *edev_ctl)
> +{
> + struct edac_device_ctl_info *edac_dev_ctl = edev_ctl;
> + struct llcc_drv_data *drv = edac_dev_ctl->pvt_info;
> + irqreturn_t irq_rc = IRQ_NONE;
> + u32 drp_error, trp_error, i;
> + bool irq_handled;
> + int ret;
> +
> + /* Iterate over the banks and look for Tag RAM or Data RAM errors */
> + for (i = 0; i < drv->num_banks; i++) {
> + ret = regmap_read(drv->regmap,
> + drv->offsets[i] + DRP_INTERRUPT_STATUS,
> + &drp_error);
> +
> + if (!ret && (drp_error & SB_ECC_ERROR)) {
> + edac_printk(KERN_CRIT, EDAC_LLCC,
> + "Single Bit Error detected in Data Ram\n");
"RAM" not "Ram". You have a couple of those wrong spellings.
Otherwise it is starting to look real nice, good!
--
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--
