This cosmetic change is done only for having next patch much easier to read. Moving id setup higher in probe is not affecting any usage of this driver and it also simplify error path.
Signed-off-by: Michal Simek <[email protected]> --- Changes in v3: None Changes in v2: - new patch - it can be sent separately too drivers/tty/serial/xilinx_uartps.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 5bd2b0607df6..a3e97ccb376d 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1415,6 +1415,16 @@ static int cdns_uart_probe(struct platform_device *pdev) if (!port) return -ENOMEM; + /* Look for a serialN alias */ + id = of_alias_get_id(pdev->dev.of_node, "serial"); + if (id < 0) + id = 0; + + if (id >= CDNS_UART_NR_PORTS) { + dev_err(&pdev->dev, "Cannot get uart_port structure\n"); + return -ENODEV; + } + cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver; match = of_match_node(cdns_uart_of_match, pdev->dev.of_node); @@ -1476,16 +1486,6 @@ static int cdns_uart_probe(struct platform_device *pdev) &cdns_uart_data->clk_rate_change_nb)) dev_warn(&pdev->dev, "Unable to register clock notifier.\n"); #endif - /* Look for a serialN alias */ - id = of_alias_get_id(pdev->dev.of_node, "serial"); - if (id < 0) - id = 0; - - if (id >= CDNS_UART_NR_PORTS) { - dev_err(&pdev->dev, "Cannot get uart_port structure\n"); - rc = -ENODEV; - goto err_out_notif_unreg; - } /* At this point, we've got an empty uart_port struct, initialize it */ spin_lock_init(&port->lock); @@ -1544,7 +1544,6 @@ static int cdns_uart_probe(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); -err_out_notif_unreg: #ifdef CONFIG_COMMON_CLK clk_notifier_unregister(cdns_uart_data->uartclk, &cdns_uart_data->clk_rate_change_nb); -- 1.9.1
