On Tue, Sep 4, 2018 at 12:28 PM, Alex Gonzalez <alex.gonza...@digi.com> wrote:
> +&lcdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcdif_dat0_17
> + &pinctrl_lcdif_clken
> + &pinctrl_lcdif_hvsync>;
> + lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */
> + status = "okay";
Missing a panel attached to the lcdif?
> +&pwm4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm4>;
> + clocks = <&clks IMX6UL_CLK_PWM4>,
> + <&clks IMX6UL_CLK_PWM4>;
Why do you need to pass the clocks here? imx6ul.dtsi already defines it.
> + status = "okay";
> +};
> +
> +&pwm5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm5>;
> + clocks = <&clks IMX6UL_CLK_PWM5>,
> + <&clks IMX6UL_CLK_PWM5>;
Same here.
> + pinctrl_sai2: sai2grp {
> + fsl,pins = <
> + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
> + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
> + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
> + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
> + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
> + /* Interrupt */
> + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x80000000
Please do not use 0x80000000. Use the real IOMUX value instead.
