Hi Pavel, On 7 September 2018 at 05:16, Pavel Machek <pa...@ucw.cz> wrote: > Hi! > >> diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx >> b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx >> new file mode 100644 >> index 0000000..d8056d5 >> --- /dev/null >> +++ b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx >> @@ -0,0 +1,22 @@ >> +What: /sys/class/leds/<led>/hw_pattern >> +Date: September 2018 >> +KernelVersion: 4.20 >> +Description: >> + Specify a hardware pattern for the SC27XX LED. For the SC27XX >> + LED controller, it only supports 4 stages to make a single >> + hardware pattern, which is used to configure the rise time, >> + high time, fall time and low time for the breathing mode. >> + >> + For the breathing mode, the SC27XX LED only expects one >> brightness >> + for the high stage. To be compatible with the hardware pattern >> + format, we should set brightness as 0 for rise stage, fall >> + stage and low stage. >> + >> + Min stage duration: 125 ms >> + Max stage duration: 31875 ms >> + >> + Since the stage duration step is 125 ms, the duration must be >> + a multiplier of 125, like 125ms, 250ms, 375ms, 500ms ... >> 31875ms. >> + >> + Thus the format of the hardware pattern values should be: >> + "0 rise_duration brightness high_duration 0 fall_duration 0 >> low_duration". > > If I'm not mistaken, this is: > > "0 rise_duration brightness high_duration brightness > fall_duration 0 low_duration". > > Right?
Hmmm, for SC27XX led, there is no need to set brightness for rise and fall stage. > > With that fixed: > > Acked-by: Pavel Machek <pavel@ucw.c> Thanks. -- Baolin Wang Best Regards
