From: Frank Rowand <frank.row...@sony.com>
Cosmetic change of integer value "0" in the third field of the
"interrupts" property to the correct named constant.
Signed-off-by: Frank Rowand <frank.row...@sony.com>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi
b/arch/arm/boot/dts/qcom-msm8974.dtsi
index c7198900b426..1e54113d6d9a 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -586,7 +586,7 @@
blsp1_uart1: serial@f991d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991d000 0x1000>;
- interrupts = <GIC_SPI 107 0x0>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_NONE>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc
GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -595,7 +595,7 @@
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
- interrupts = <GIC_SPI 108 0x0>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc
GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -605,8 +605,8 @@
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <GIC_SPI 123 0>,
- <GIC_SPI 138 0>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>,
+ <GIC_SPI 138 IRQ_TYPE_NONE>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
@@ -633,8 +633,8 @@
compatible = "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <GIC_SPI 125 0>,
- <GIC_SPI 221 0>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_NONE>,
+ <GIC_SPI 221 IRQ_TYPE_NONE>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>,
@@ -701,7 +701,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <GIC_SPI 208 0>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_NONE>;
};
i2c@f9924000 {
@@ -746,7 +746,7 @@
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 190 0>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
--
Frank Rowand <frank.row...@sony.com>
