On Thu, Sep 6, 2018 at 9:21 PM Ley Foon Tan <ley.foon....@intel.com> wrote: > > On Wed, 2018-09-05 at 18:53 -0500, Rob Herring wrote: > > Align nios2 with other architectures which build the dtb files in the > > same directory as the dts files. This is also in line with most other > > build targets which are located in the same directory as the source. > > This move will help enable the 'dtbs' target which builds all the > > dtbs > > regardless of kernel config. > > > > This transition could break some scripts if they expect dtb files in > > the old location. > > > > Cc: Ley Foon Tan <lf...@altera.com> > > Cc: nios2-...@lists.rocketboards.org > > Signed-off-by: Rob Herring <r...@kernel.org> > > --- > > Please ack so I can take the whole series via the DT tree. > > > > arch/nios2/Makefile | 4 ++-- > > arch/nios2/boot/Makefile | 4 ---- > > arch/nios2/boot/dts/Makefile | 1 + > > 3 files changed, 3 insertions(+), 6 deletions(-) > > create mode 100644 arch/nios2/boot/dts/Makefile > > > > diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile > > index 8673a79dca9c..50eece1c6adb 100644 > > --- a/arch/nios2/Makefile > > +++ b/arch/nios2/Makefile > > @@ -59,10 +59,10 @@ archclean: > > $(Q)$(MAKE) $(clean)=$(nios2-boot) > > > > %.dtb: | scripts > > - $(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@ > > + $(Q)$(MAKE) $(build)=$(nios2-boot)/dts $(nios2-boot)/dts/$@ > > > > dtbs: > > - $(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@ > > + $(Q)$(MAKE) $(build)=$(nios2-boot)/dts > > > > $(BOOT_TARGETS): vmlinux > > $(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@ > > diff --git a/arch/nios2/boot/Makefile b/arch/nios2/boot/Makefile > > index 2ba23a679732..007586094dde 100644 > > --- a/arch/nios2/boot/Makefile > > +++ b/arch/nios2/boot/Makefile > > @@ -47,10 +47,6 @@ obj-$(CONFIG_NIOS2_DTB_SOURCE_BOOL) += > > linked_dtb.o > > > > targets += $(dtb-y) > > > > -# Rule to build device tree blobs with make command > > -$(obj)/%.dtb: $(src)/dts/%.dts FORCE > > - $(call if_changed_dep,dtc) > > - > > $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) > > > > install: > > diff --git a/arch/nios2/boot/dts/Makefile > > b/arch/nios2/boot/dts/Makefile > > new file mode 100644 > > index 000000000000..f66554cd5c45 > > --- /dev/null > > +++ b/arch/nios2/boot/dts/Makefile > > @@ -0,0 +1 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > -- > > 2.17.1 > > > Hi Rob > > I have synced your all-dtbs branch from here: https://git.kernel.org/pu > b/scm/linux/kernel/git/robh/linux.git/log/?h=all-dtbs > > It shows error when compile kernel image and also when "make > dtbs_install".
Can you fetch the branch again and try it. I fixed a few dependency issues. > make dtbs_install > make[1]: *** No rule to make target > 'arch/nios2/boot/dts/arch/nios2/boot/dts/10m50_devboard.dtb', needed by > 'arch/nios2/boot/dts/arch/nios2/boot/dts/10m50_devboard.dtb.S'. Stop. What is the value of CONFIG_NIOS2_DTB_SOURCE? As patch 3 notes, it now should not have any path. If that's a problem, I could take the basename to strip the path, but then sub directories wouldn't work either. BTW, next up, I want to consolidate the config variables for built-in dtbs. Rob
