On Thu, Aug 02, 2018 at 12:34:25PM +0200, Oleksij Rempel wrote: > This board, as well as some other boards with i.MX6 and a PMIC, uses a > "PMIC_STBY_REQ" line to notify the PMIC about a state change. > The PMIC is programmed for a specific state change before triggering the > line. > In this case, PMIC_STBY_REQ can be used for stand by, sleep > and power off modes. > > Signed-off-by: Oleksij Rempel <o.rem...@pengutronix.de>
Applied, thanks.
